1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

chillispot on hyperwrt 1.4

Discussion in 'HyperWRT Firmware' started by pof, Oct 2, 2004.

  1. pof

    pof Guest


    I've a WRT54G, with hyperwrt 1.4 where I try to run chillispot but it segfaults when I execute it.

    I've used the batbox addon, and also I added some stuff, I use nfs to save ram space and have some binaries like strace to be able to debug problems.

    Below is the output of strace when I try to run chillispot. It works fine if I exec it with '-h', so it's not a library problem, and the 'tun' module is loaded correctly:

    /tmp # lsmod
    Module Size Used by
    nfs 90000 0
    lockd 61920 0 [nfs]
    sunrpc 84656 0 [nfs lockd]
    tun 4528 0 (unused)
    diag 1168 0 (unused)
    wl 401600 0 (unused)
    4702et 18448 2
    /tmp # dmesg |grep -i tun
    Universal TUN/TAP device driver 1.5 (C)1999-2002 Maxim Krasnyansky
    /tmp # ./strace /tmp/usr/sbin/chilli --conf /tmp/etc/chilli.conf
    execve("/tmp/usr/sbin/chilli", ["/tmp/usr/sbin/chilli", "--conf", "/tmp/etc/chilli.conf"], [/* 4 vars */]) = 0
    +++ killed by SIGSEGV +++

    Has anyone been able to run chillispot on hyperwrt? Any help would be apreciated.

  2. lud

    lud Network Guru Member

    Hello !

    Are you sure that your strace is working ?
    I've found a compiled strace and I can't strace anything with it:

    # ./strace busybox
    execve("/bin/busybox", ["busybox"], [/* 4 vars */]) = 0
    +++ killed by SIGSEGV +++

    If you can strace busybox for example, I would be happy to try your strace binary and help you !
  3. lud

    lud Network Guru Member

    Also could you send me a link where I could get the utilities to run an nfs client ?



Share This Page