Cisco button unreliable?

Discussion in 'Tomato Firmware' started by hadede, Mar 16, 2009.

  1. hadede

    hadede Addicted to LI Member


    I'm now using Tomato for the last view weeks. One of the features I like very much is to use the SES button as I like. I use the Tomato default settings, i.e.. 0-2sec toggle wireless.

    But it seems unreliable to me. Sometimes I have to press it 2-3 times to make it work. Then the DMZ led will blink and afterwards the WLAN led will switch on/off.

    I already took care to be sure to press it to rule out that the switch contact is not closed...

    Any suggestions?
  2. Kiwi8

    Kiwi8 LI Guru Member

    I have the same problem too. I guess it's a hardware limitation.

    Anyway, what I do is make sure I hold the button for at least one second before letting go.
  3. hadede

    hadede Addicted to LI Member

    I tried different timings on how long to press the button within 0-2sec.
    But I couldn't find any difference. It seems to reject the input sporadically...
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice