1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Client mode problem

Discussion in 'Sveasoft Firmware' started by sioca, Oct 20, 2004.

  1. sioca

    sioca Guest

    I have 3 linksys:
    1 with Linksys Firmware update to (hardware v1.0) | hard10
    1 with Linksys Firmware no update (hardware v1.1) | hard11
    1 with Sveasoft Satori-4.0 v2.07.1.7sv (hardware v2.0) | hard20

    The first Wifi with hard11 is ok for client mode on hard20. I use WEP 64 bits with passphrase and default channel.

    The second wifi with hard10 doesn't work for client mode on hard20. I can't look MAC Adress of hard20 in "Wireless/MAC Filtre" on hard10. In the hard20 I don't have the line with noise of AP. I use WEP 128 and channel 11.

    Is it an hardware probleme of hard10 ?
  2. grcore

    grcore Network Guru Member

    Please be a little more specific on your configuration. which is the main router, and are you using 64 or 128 WEP?


Share This Page