1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Clients connected behind WRT54G router cant access the internet

Discussion in 'Cisco/Linksys Wireless Routers' started by reyemarr, Aug 7, 2012.

  1. reyemarr

    reyemarr Serious Server Member

    Hi,

    First this is my setup:
    ==== cable
    ///\\\ wireless

    Comcast Cable Modem ===== Netgear WDNR3700V2 (Gargoyle 1.5.6)
    Netgear WDNR3700V2 (1.5.6) ///\\\ WRT54G (Gargoyle 1.5.) ===== PC1 & PC2

    The WRT54G is set up as a wireless bridge (no repeater).

    The problem: whatever I connect to the WRT54G does not have access to the internet

    Troubleshooting:
    *Anything connected directly to the wdnr7300 works just fine
    *I can ping all clients connected to the WRT54G (PC1 & PC2) from any other client in my lan
    *PC1 & PC2 can ping any clients connected to the WNDR3700V2
    *already done multiple restarts
    *If I ping an internet host from a client connected to the WRT54G (PC1 or PC2), the ip gets resolved, by I get a messgae stating that he host is unreachable.

    Help please!!! [​IMG] [​IMG] [​IMG]

    It appears that i have internal connectivity but no access to the outside world from the WRT54G. Any ideas?

    Thanks in advance,

    Mario
     
  2. Sandy Pittendrigh

    Sandy Pittendrigh Serious Server Member

    Same problem. WRT54G says it's connected. My linux box says it has a connection. I can see the default 192.168.1.1 interface.
    Nothing resolves. My Linux box (/sbin/ifconfig) thinks it is 192.168.1.100
    I get service from an Optimum cable modem, which goes to a simple netgear switch
    That connection works just fine if I plug lead (from switch) directly into my linux box.
    But no DNS if I plug the lead into the WRT54G, and then patch that to the linux box

    I can ping 192.168.1.1 from linux.
    So (it seems) everything is working except DNS
     

Share This Page