1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Compiling tomato with FUSE support

Discussion in 'Tomato Firmware' started by lockheed, Dec 10, 2013.

  1. lockheed

    lockheed Reformed Router Member

  2. koitsu

    koitsu Network Guru Member

    No, that has nothing to do with fuse. The .c file you linked to is part of Busybox's procps suite and likely just contains functions used by the procps tools it provides.

    I cannot help you with the rest of your request.
     
  3. mstombs

    mstombs Network Guru Member

    There's some support for fuse in Entware, but surely you need a recent router with usb and a better cpu than WRT54G to be able to take advantage?
     
  4. lockheed

    lockheed Reformed Router Member

    Why would I? WRT54G has kernel 2.4 which is fuse-capable, and fuse allows me to mount network/ftp/online storage as a drive, so lack of usb becomes resolved (to some extent).
     
  5. mstombs

    mstombs Network Guru Member

    Its great credit to Linksys that their hardware lasts so long - is it even a WRT54G-TM with 8MB flash and 32MB ram ? - I bought mine over 5 years ago, but has been in storage for a couple of years now!

    Entware seems to have the user-space tools, and has a great build system (OpenWrt based) which rebuilds everything from original source so do look there.
     
  6. lockheed

    lockheed Reformed Router Member

    It is WRT54G v.2
    I have ~900kb of free space on jffs. Would that be enough for entware?
     
  7. leandroong

    leandroong Addicted to LI Member

    My transmission entware optware consume only 81,700bytes. I think should be more than enough
     
  8. lockheed

    lockheed Reformed Router Member

    I can't run the install script. I get
    Code:
     *** Error:  Please enable JFFS partition from web UI, reboot router and
     *** Error:  try again.  Exiting... 
    even though I enabled jffs and rebooted.

    By the way, I only have 576.00 KB free
    Code:
    Filesystem          1K-blocks      Used Available Use% Mounted on
    /dev/root                2624      2624        0 100% /
    tmpfs                    7200      2508      4692  35% /tmp
    /dev/mtdblock/3            640        64      576  10% /jffs 
     
  9. leandroong

    leandroong Addicted to LI Member

  10. lockheed

    lockheed Reformed Router Member

    Your link doesn't work, but the error I got was when running entware install script entware-setup.sh
     
  11. leandroong

    leandroong Addicted to LI Member

    make sure /jffs is accessible.
    1. cd /jffs
    2. mkdir /jffs/opt
    3. mount -o bind /jffs/opt /opt
    4. cd /opt
    5. install optware procedure
     
  12. lockheed

    lockheed Reformed Router Member

    Thanks, but I've done it and it's still the same error.
     

Share This Page