1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Complete connection list in telnet/ssh?

Discussion in 'HyperWRT Firmware' started by unilever, Aug 7, 2006.

  1. unilever

    unilever LI Guru Member

    Hi, what is the linux shell command to list all the wired and wireless dhcp and static ip connections on the router? This will be very useful because there's no way to see the static ip connections in the web interface.

    Thanks!
     
  2. Toxic

    Toxic Administrator Staff Member

    Once you have telneted to the router, press the TAB key twice. it will list the commands.

    each command may have more settings and sub commands. there are far to many to list!
     
  3. Thibor

    Thibor Super Moderator Staff Member Member

    cat /tmp/.dnsmasq.leases
    wl assoclist for associated wireless clients
     
  4. unilever

    unilever LI Guru Member

    Thanks for the replies.

    For some reason the .dnsmasq.leases file is 0 bytes and there are currenly two clients connected to the router. Also the "wl assoclist" command only lists the mac address of the wireless client.

    What I'm trying to find is a file accessible in the shell that updates an ip list in real-time as clients connect or a command that does the similar thing. Does such a file/command exist?


    Thanks
     
  5. Thibor

    Thibor Super Moderator Staff Member Member

    you could look at DeviceList.asp in the web interface.
     
  6. digitalgeek

    digitalgeek Network Guru Member

    Client list...

    Is the a command line equivalent to DeviceList.asp... occasionaly I want to look at the overall behaviour including clients remotely from telnet/ssh.
     

Share This Page