1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

connect WRV200 to a Netgear FVS318 Vpn

Discussion in 'Cisco Small Business Routers and VPN Solutions' started by ChinaLamb, Jun 7, 2007.

  1. ChinaLamb

    ChinaLamb Guest

    I want to set up a vpn to connect to a FVS318 Netgear VPN. Is this possible to use a WRV200 to make this VPN connection? What are the things I should look out for?


  2. ifican

    ifican Network Guru Member

    Yes this works, just need to make sure you have the setting correct on both sides. The FVS can be a little daunting as the configuration can seem really tough, but the wizard is pretty good, give it a try and ask if you have problems.
  3. Aestas

    Aestas Guest

    hm, i figured out some problems, if you are using dynamic wan-ip's with both
    routers. The 'Local IPSec Identifier' on the fvs318 must be your wan-ip. If you are using another name for it, for example your dyndns FQDN it won't work.
    Tested with WRV200 and FVS318v1.

Share This Page