1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Connecting to BEFVP41 from behind WRTG54

Discussion in 'Cisco Small Business Routers and VPN Solutions' started by HappyCanuck, Aug 10, 2005.

  1. HappyCanuck

    HappyCanuck Network Guru Member

    For secure access I have installed a BEFVP41 in our office. I want to allow employees from their homes to:
    1. connect to shares
    2. have their AV and Spyware definitions updated by the server

    I've set up the VPNs on the VP41, it is 192.168.1.1.

    I'm on my system at home, behind my WRT54G, it is 192.168.3.1

    I'm using Greenbow client to connect to the VP41 successfully
    - Phase 1 is straight forward
    - Phase 2 has:
    - VPN Client address of 192.168.3.75
    - Remote LAN address of 192.168.1.1/255.255.255.0

    When I connect I can use Remote Desktop Connection and connect to shares BUT I can't get my system names working and the clients don't show up in the office net browser.

    Any suggestions?
     
  2. TazUk

    TazUk Network Guru Member

    What do you mean by that, you can't ping by machine name?
     
  3. HappyCanuck

    HappyCanuck Network Guru Member

    Right, can't ping by system name and the systems don't show in the "Network Neighbourhood"
     
  4. DocLarge

    DocLarge Super Moderator Staff Member Member

    Have you checked to see if the "netbios" feature has been enabled on the BEFVP41's advanced setup screen?

    Doc
     
  5. HappyCanuck

    HappyCanuck Network Guru Member

    Yes, the NetBIOS Broadcast is checked in Advanced Settings.

    This is a BEFVP41 V2, firewall turned off.
     
  6. TazUk

    TazUk Network Guru Member

    Is there a server at the office?

    Is it running Windows 2000 Server or higher?
     
  7. HappyCanuck

    HappyCanuck Network Guru Member

    Yes there is a server, running Windows Server 2000.

    Cheers
     
  8. TazUk

    TazUk Network Guru Member

    That will use DNS for name resolutions, so you need to have the primary DNS server on the client PC set to the IP address of the server.
     

Share This Page