1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Connecting two pc's to WAG54G

Discussion in 'Networking Issues' started by ergoz, May 15, 2005.

  1. ergoz

    ergoz Guest


    I have WAG54G and was using one PC without any problem.
    I didn't any special settings, and my pc connecting to internet with success

    Now, I wanted to use same modem for another PC wia cable,
    but I couldn't do that.

    I'm experienced in pc but not LAN.

    So, what is wrong and how can I use my modem for more than one pc.

    Another problem,
    I have downloaded new firmvare file with BIN extension.
    How I can install/update the firmware.

  2. TazUk

    TazUk Network Guru Member

    Hi, the WAG54G is a router not a modem and so should allow several PC's to connect to the internet though it either via a wired or wireless connection. Have you double checked the settings on the wired PC?

    Firmware updates are done via the web based admin, just point you browser at , assuming you haven't changed the routers private IP address ;)
  3. dribble

    dribble Network Guru Member

    Confirming network settings

    If you could post the details from a ipconfig /all into this post it might help us point you in the right direction.

Share This Page