1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Connecting WRT54G to Wired Router

Discussion in 'Networking Issues' started by fool13, Aug 6, 2005.

  1. fool13

    fool13 Guest

    I recently received a new 4 port wired DSL router from my ISP to eliminate connection drops. However, I cannot figure out how to get my wireless router to work with the wired router. The technician said it would need to be set up as a bridge. What are the steps to do this?

    The wired router is Netopia brand.

    Thank you
    rp
     
  2. HoMa

    HoMa Network Guru Member

    That should be easy:

    I did it like this:

    Router 1 (connected to DSL) connected to the UPLINK of the WRT54.
    Router 1 is 192.168.1.1 (255.255.255.0)
    WRT54 Internet connection can be dynamic (DHCP), if Router 1 has DHCP enabled or with static IP ( one like 192.168.1.2, std getaway 192.168.1.1)
    On the wrt54 's Client side I configured 192.168.2.1 and enabled DHCP.
    So router 1 just manages the DSL modem and the WRT54 "is" my network. With such a setup you can connect multiple wRTs to one router and have a subnet for each :)

    regards
    HoM
     

Share This Page