1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

connection suddenly cuts!!

Discussion in 'HyperWAP Firmware' started by tommyz, Feb 22, 2005.

  1. tommyz

    tommyz Guest

    hayy...i'v upgraded the firmare of the wap54G by hyperwap firmware...and it was running very good for a long time...suddenlt today the connection cuts continously...i regain the connection by changing the channel or restarting the AP...i tried all the channels but they stay connected for a certain time then again disconnected...my wirless pc card suddenly doesnt see the AP...so anyone can help??
     
  2. kiddsck253

    kiddsck253 Guest

    I've had the same problem. Happened about 15 min. ago from this post. I changed the RTS and Fragmentation thresholds to 2304 and the beacon interval to 50. So far so good; no new disconnects. If anything changes I'll post something new. But if anyone has an official solution I would appreciate it
     
  3. ts86net

    ts86net Network Guru Member

    I've had random disconnection problems as well.

    I've just change my beacon/RTS/Fragmentation settings as your suggestion and it seems to have improved. The connection feels faster a bit anyway.

    Will need to keep it monitored though.
     
  4. sutil

    sutil LI Guru Member

    when i encountered the same problem what i do is to chenge my AP to from mixed B&G to B only and that cures it
     

Share This Page