1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Controlling/redirecting LAN leds?

Discussion in 'Tomato Firmware' started by psychowood, Mar 8, 2007.

  1. psychowood

    psychowood Network Guru Member

    Since I have only 1 cabled PC connected to my GLv1.1, and three (constant) wireless clients, it could be possible to somewhat "link" the unused lan leds with the macs addresses of those three PC? I could try to write a script, but I need to know how to turn on/off the leds..

    The led command help says

    led <diag/dmz/wlan/white/amber> <on/off> [...]

    what [...] mean? Some hidden command to control the other leds? :)
  2. Kibe

    Kibe LI Guru Member

    Interesting idea!

    Please let me know if you are successful...
  3. digitalgeek

    digitalgeek Network Guru Member

    I think you might have to look into making your on util...
  4. psychowood

    psychowood Network Guru Member

    Sorry, what do you mean? I'm not sure I understood correctly :redface:
  5. psychowood

    psychowood Network Guru Member

    Just got a mail reply from Jonathan (the Tomato developer), told me that those leds are hard wired and it's not possible to control them :frown:

    PS. [...] means that the command is repeatable: led white on amber off

Share This Page