1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

D-link IPcams and WRT54GX

Discussion in 'Cisco/Linksys Wireless Routers' started by whosnext, May 11, 2005.

  1. whosnext

    whosnext Network Guru Member

    I got nothing but troubles and connection loss with mij D-link DCS ip cams and the new WRT54GX with SRX.

    I got the latest firmware 1.0.1.0.5 but still no improvements.

    Any help would be welcome.
     
  2. SimonMackay

    SimonMackay Network Guru Member

    Hi!

    Try disabling any proprietary "speed-boost" or "range-extend" modes that don't work with the 802.11g standard. Some of these modes can play havoc with STAs (wireless clients) that don't comply with the proprietary modes. Simply run the router according to "pure" 802.11g standards because these D-Link cameras work to standards.

    Also, try upgrading the firmware on the D-Link cameras. There may be firmware problems here wth them.

    With regards,

    Simon Mackay
     

Share This Page