1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

DDr-WRT with WPA2 ?

Discussion in 'DD-WRT Firmware' started by jlw, Apr 25, 2005.

  1. jlw

    jlw Network Guru Member

    When will we se that combination? :)
     
  2. RMerlin

    RMerlin Network Guru Member

    Probably not before Linksys releases the source code for the V4 firmware.
     
  3. Cyberian75

    Cyberian75 Network Guru Member

    So DD-WRT doesn't support WPA-AES right now even with Talisman???
     
  4. jagboy

    jagboy Network Guru Member

    yes dd-wrt deos support it it has a option in the web interface
     
  5. gotamd

    gotamd Network Guru Member

    This post is about WPA2, not the standard WPA that most people are referring to when they say WPA. DD-WRT definitely supports WPA just fine. I can't imagine WPA2 will take too long once the source from the official Linksys firmware is released. Even if it is, it's really not important AFAIK. WPA is really, really hard to crack or so I've heard (if it's even crackable...but I'm sure it is somehow).
     
  6. Avenger20

    Avenger20 Network Guru Member

    I think WPA & WPA2 are the same (at least in the linksys firmware).

    Normally,
    WPA = TKIP
    WPA2 = TKIP + AES

    It's possible they had to change some small parameters to get it WPA2 certified.
     
  7. jagboy

    jagboy Network Guru Member

    i think you are wrong Avenger20 becuase then wpa2 would be in dd-wrt pre 5
    [​IMG]
     

Share This Page