1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

ddwrt to Tomato, is this all i have to do?

Discussion in 'Tomato Firmware' started by Missing Linksys, Dec 31, 2008.

  1. Missing Linksys

    Missing Linksys Addicted to LI Member

    WRT54GS V1 has on it now, Firmware: DD-WRT v24-sp1 (08/24/08) mini

    Is this all I have to do?

    If you're upgrading from the DD-WRT firmware, telnet into the router *before* upgrading and type "nvram get http_passwd". The result will be your password in Tomato. This is necessary because of a change in DD-WRT's way of using the standard http_passwd variable.

    If you upgraded from another firmware, a complete reset is recommended. Go to Administration/Configuration and select "Erase all NVRAM..." after installing Tomato.
    on Tomato it is mtd-erase -d nvram to erase nvram

    Then flash router...

  2. spliff

    spliff LI Guru Member

    Yes. Save the password and use it to log into tomato with username admin. Then go to administration and do a full factory reset (the one that uses nvram erase).

Share This Page