Hello everybody, i have a wap54g v3 and flashed it to death with mustdie for v1. Following things i have tested: tried to upload flash with tftp tried to short pin16 at the sst39vf1601 build jtag cable with jtag cable it says always chipid FFFFFFFF , same value, as i have not plugged the cable. I tested it under linux with two different machines using ecp or epp port setup. I tested also the winxp solution with same effekt. My cable is about 20cm long. Next step i will do is to build a serial cable. Has anybody an idea how i can fix this?