1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Device Identification?

Discussion in 'Tomato Firmware' started by fastpakr, Feb 16, 2007.

  1. fastpakr

    fastpakr Network Guru Member

    I may be looking right past it, but is there a place in Tomato to see what device it's running on? Obviously it detects automatically because it defaults to 10mW when I install it on a WHR-HP-G54, but something else (40, maybe - I don't remember now) when I put it on a G54S. I just can't find where to see it explicitly stated like the 'Router Model' field in DD-WRT.
  2. bokh

    bokh LI Guru Member

    Eh... it's in the top-righthand corner of all the HTML-pages.
  3. der_Kief

    der_Kief Super Moderator Staff Member Member

    Thats the name you define in the Identification Tab -> Router name ! This name could be everything. I guess you name this field like your model !?

  4. bokh

    bokh LI Guru Member

    My goodness... thanks for the heads-up! I named it like that indeed.
    I guess Tomato must be getting it's HW-info out of the proc-filesystem, e.g. /proc/cpuversion and /proc/pci
  5. fastpakr

    fastpakr Network Guru Member

    Yep, that's just the name you assign. Thanks for any suggestions you can come up with.
  6. Max Monroe

    Max Monroe LI Guru Member

    Are you sure it really sets tx power by model, and it isn't just using a previously existing nvram (default) setting? I'm just asking, I don't know either...
  7. fastpakr

    fastpakr Network Guru Member

    Yeah, it definitely adjusts the tx output down to 10 for the HP, even with an nvram clear.

Share This Page