DHCP Active IP Table

Discussion in 'HyperWRT Firmware' started by madLyfe, Feb 9, 2005.

  1. madLyfe

    madLyfe Network Guru Member

    Why is it that when I go to the DHCP Active IP Table it shows a pc thats on, my laptop thats off, and it doesn't show the computer I am curently using that is on the network and even running.. If you could let me know that would be awesome.
  2. madLyfe

    madLyfe Network Guru Member

    does anyone know?
  3. dadaniel

    dadaniel Network Guru Member

    It only display the machines getting their ip via dhcp from the router
  4. slamcat

    slamcat Network Guru Member

    Typical lease time for a DHCP IP is 86400 seconds, or 1 day. If your machine has been on for any period of time to obtain that lease, it continues to display in the dhcp table until the lease expires, or until you delete it.
  5. madLyfe

    madLyfe Network Guru Member

    is there anyway to make a list to show an entire clients table? and maybe show every one that has accesed the network and maybe show names in red that are currently not connected to the network?
  6. howardp6

    howardp6 Network Guru Member

    It will also not show any computer setup with a static IP address since they are not DHCP Clients of that router. If you have a long DHCP lease, it will show computer that still have an unexpired lease. If you are using the router as an access point (hooked up to another router used as a gateway), you will not see them either. If you are using MAC address filtering that feature, all PCs that are connected. That feature is not available on the WRT54GX.
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice