1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

DHCP addressing problems

Discussion in 'Cisco/Linksys Wireless Routers' started by daringdave, Jun 6, 2005.

  1. daringdave

    daringdave Guest

    Here's a problem someone may be able to help me with.

    I have 2 wrt54g routers (1 ver2 & 1 ver3) and 1 befsr41 wired router. Also,I have 2 IP's dynamically assigned from my ISP. One goes to a multi-homed server and the other IP goes to a router for my internal wired/wireless network.

    My server picks up one address and the befsr41 grabs the other just fine. When I swap the befsr41 with either of the wrt54g's neither one pick up the dhcp address assigned by my ISP. For a while the other day, if I disabled the wan connection on my server, the wrt54g would pick up an address and when I re-enabled the wan on the server, It would not.

    I have tried the stock firmware from linksys on both wrt545g routers as well as dd-wrt.v22.prefinal3.2, wifibox2.02.2.2, alchemy v1.0 on the ver2 and dd-wrt.v22.prefinal4 on the ver3

    I've spent about 4 days working on this problem with no luck.

    BTW, I had this configuration working for about 4 months on the ver2 wrt54g with an older version of wifibox firmware (can't remember which beta it was)

Share This Page