1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

DHCP Clients Table is now blank

Discussion in 'Cisco/Linksys Wireless Routers' started by mwtkns, Jul 28, 2006.

  1. mwtkns

    mwtkns Addicted to LI Member

    I don't know what I may have done to change things, but the WRT54GS DHCP Clients Table has suddenly decided to come up empty. The router is still set up with DHCP enabled, the network seems to be running normally (all computers are still on the network and the internet), I can still address our various access points, etc. Any ideas?
     
  2. slamcat

    slamcat LI Guru Member

    If you've done a reboot within the lease time expiration, this can happen. When the clients start asking for leases again, you should see the table populate.
     
  3. mwtkns

    mwtkns Addicted to LI Member

    The table continued to be empty -- for about three days -- even with many clients (a dozen or more) continually accessing the internet. But...your reference to "rebooting" caused me to think I should simply try unplugging the router for a minute. Now that I've done that, the table is repopulating. I should have tried that sooner...duh. Thanks for planting the thought.
     

Share This Page