1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Dhcp Problem With Aolynk + WRT54g+Tomato

Discussion in 'Tomato Firmware' started by brunofsribeiro, Jun 10, 2008.

  1. brunofsribeiro

    brunofsribeiro Addicted to LI Member

    Hi!
    I´ve been using my linksys+tomato attached to an aolynk adsl2+ modem/router for some time now. I configured aolynk to work as a solo modem, and linksys was making the ppoe connection. Everything was working fine.

    The problem is that now I have to use the aolynk modem/router to make the ppoe connection due to isp iptv restrictions. I tried to configure the linksys+tomato to distribute aolynk network wirelessly, but i can´t make it work.

    The aolynk is connecting ppoe, has dhcp activated from 192.168.1.2 to .50, address is 192.168.1.1.

    How do I configure the WRT54G+tomato? Is it WDS? Is it CLIENT MODE?
    Does dhcp need to be activated? DHCP server activated?

    I think i tried everything but can´t make it work...

    Any help will be appreciated.
     
  2. HennieM

    HennieM Network Guru Member

    Tomato in AP mode, IP something like 192.168.1.51, DHCP server off, and plug the network cable from the modem into one of Tomato's LAN ports.
     
  3. brunofsribeiro

    brunofsribeiro Addicted to LI Member

    Thanks for your help! I'll try it when I get home.
     
  4. brunofsribeiro

    brunofsribeiro Addicted to LI Member

    Thanks! It worked!

    You can close thread.
     

Share This Page