1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

DHCP scope issue (LAN)

Discussion in 'DD-WRT Firmware' started by Netman66, Feb 26, 2006.

  1. Netman66

    Netman66 Network Guru Member

    Latest build (v23) - standard (no VOIP)

    If you change the router's IP address to something other than 192.168.1.x the DHCP LAN scope doesn't update to match subnet of new router's IP. Set IP of router to 192.168.2.1 and save. The first 3 octets in the DHCP scope seem to be hard coded.

    Not a big issue, but I need something other than 192.168.1.x

    Not sure if this was posted or not, but couldn't see it.

    Cheers.
    NM
     
  2. Zank

    Zank Guest

    I tried it yesterday with v23 WITH VOIP and it failed to update also. It hung in the blinking power LED mode so I had to reset it via the button on the back. I also need a different IP.
     

Share This Page