1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

DHCP-server problem with Tofu 7

Discussion in 'HyperWRT Firmware' started by dadaniel, Nov 3, 2005.

  1. dadaniel

    dadaniel Network Guru Member

    I'm experiencing strange problems with Tofu 7.


    I power up my PC and get this IP assigned via DHCP from my WRT54G:

    192.168.1.100


    After some time my network connection drops(network-icon dissapears).



    Then my PC get a new IP-address, ALWAYS the same:

    192.168.1.138



    There is something in my system-log:

    The DHCP-server has send "DHCPNACK"-message.




    This is really annoying.

    Tested with three different computers, even my wireless devices get disconnected.

    No problems with original firmware from linksys:
     
  2. fracturex

    fracturex Network Guru Member

    I noticed a similar problem, haven't checked the IP yet to confirm what you are seeing. But PCs connected through wireless are loosing connection after (what I believe to be) Group Key Renewal . When I set this to the maximum of 7200 sec it takes longer to loose connection. A reboot of the PC fixes the problem.

    Probably has to do with my own settings here. But if there are more with the same problem I will revert back to previous version.

    thanks
     
  3. dadaniel

    dadaniel Network Guru Member

    mhm.... also my LAN(!)-devices get disconnected.


    Too bad ... tofu 7 is a very great firmware, maybe this can be fixed in future :drinking: :sadbye:
     
  4. fracturex

    fracturex Network Guru Member

    went back to 6.2. everything fine again. let's wait and see.

    a day later with still no connection problems. I am going to stick with 6.2 for a while now.
     
  5. bdm_module

    bdm_module Network Guru Member

    I had the same problem, get a completely different ip-adres.
    Starting from192.168.1.10 till 192.168.1.50, normaly i will get 192.168.1.11 but now i will get 192.168.1.52 and no connection.
    By exstand the range from 50 to 60 it was working but changed to Tarifa B008 firmware no problems with that so I am waiting on a next release of Tofu
     
  6. dadaniel

    dadaniel Network Guru Member

    What is Tarifa-firmware? Where to get it?
     
  7. Tregge

    Tregge Network Guru Member

  8. bdm_module

    bdm_module Network Guru Member

    You will find Tarifa in the download section under WRT54G, there it is listed.
     

Share This Page