1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

different subnets

Discussion in 'General Discussion' started by Anonymous, Sep 7, 2004.

  1. Anonymous

    Anonymous Guest


    I want to run different subnets on my network.

    Obviously going to have to setup static routes so the computers can talk between the different networks.....can anyone please give me instructions on how to do this?

  2. TazUk

    TazUk Network Guru Member

    A breif description on how your network is currently setup and how you would like it would be helpful ;)
  3. Anonymous

    Anonymous Guest

    network config

    Sorry about that.

    I currently have a subnet of 165.69.50.* 1-10 of the host IPs are static addresses the rest are dynamic. The router address is also static and is

    Im wanting to know what I would have to do to say add another subnet of lets say 165.69.49.* and have both subnets talk to one another...im not fussed if it requires an additional router etc. Im just wanting to know the setup details.

    Also I was wondering if it was possible to setup VLANs on the WRT54G router? If so can anyone point me towards some instructions?

    Thanks People :)
  4. TazUk

    TazUk Network Guru Member

    Re: network config

    Well you would require another router as that's what they do, join two networks together ;) If you used a Linksys BEFSR41 you'd set the WAN IP address to one in the range of the first network and the LAN IP address to one in the second network. Make sure it's running in Router rather than Gateway mode and that should be it. You may need to setup some static routes depending on what's on either side.

Share This Page