1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Disassembly of a v3 wrt54g router??

Discussion in 'Cisco/Linksys Wireless Routers' started by jherre6, Jun 13, 2005.

  1. jherre6

    jherre6 Network Guru Member

    Hello,

    I have a V3 router and I am trying to take it apart. I know if you turn it upside down and push the two legs, it should snap apart, but it's not. What happens is the top part comes loose. With a little work, I can get the top off, but I can't get the blue front part off.

    I do not want to break it, but I have given it a lot of force. Is there a trick to get the blue front part off. I also have a V2 router that the front just snaps on and off.
    I want to add a 12v fan, but need to get to the bottom of the circuit board to do so, meaning the front needs to come off

    thanks


    YES
     
  2. jagboy

    jagboy Network Guru Member

    take the 2 front rubber feet off and you will find some screws take the screws out
     

Share This Page