1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

DNSMASQ and Windows Server 2008 R2

Discussion in 'Tomato Firmware' started by kenyloveg, Sep 14, 2009.

  1. kenyloveg

    kenyloveg LI Guru Member

    Create a DNS delegation to Windows Server 2008 R2

    Hi, Guys
    I'm adding a Windows Server 2008 R2 via Vmware workstation now.
    My network is hosting by a Router running Tomato with dnsmasq. I'm wondering how to customize the settings in DNSMASQ to work with AD/DNS/DHCP function provided by Server 2008 R2.
    Current problem is 2008 R2 indicate DNS server need delegation. Tomato router is for outside resolution, and secondary DNS (2008 R2) is for inside AD usage. Plus, for WDS (Windows Deployment Service, aka RIS) a DHCP is also required to be set up on 2008 R2. (This can be replaced by PXE with grub4dos boot management)
    Can anyone provide some recommendation?
    By the way, I've been through the DNSMASQ manual. And add
    Code:
    server=/domaincontroller.inside.xxxx.com/192.168.10.200
    srv-host=_ldap._tcp.dc._msdcs.inside.xxxx.com,domaincontroller.xxxx.com,389,0,100
    Thanks.
     
  2. kenyloveg

    kenyloveg LI Guru Member

    Hi, fellows
    I'm still struglling on this......
    And i found this artical, How To Integrate Windows Server 2003 DNS with an Existing DNS Infrastructure in Windows Server 2003
    http://support.microsoft.com/?scid=kb;en-us;323417&x=10&y=10
    But seems Windows DNS Server have extra security settings to prevent anyone to pretend it is a DC, it's called like Authoritative or something else which also based on RFC......

    Any advice?
     

Share This Page