1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Does latest Teddy_Bear build 44 run on RT-N16

Discussion in 'Tomato Firmware' started by myersw, Feb 19, 2010.

  1. myersw

    myersw Network Guru Member

    Does the 44 build support the Asus RT-N16? Reason I ask is I tried installing
    tomato-1.27-ndusb-8744-ext.rar (yes I expanded) and bricked the router. Could not get the Asus recover utility to work. Was able to get the router back by tftp asus 1.0.0.6 then dd-wrt then upgrade to tomato-ndusb-9042rtn16-beta02-ext.trx. Actually renamed to .bin to upgrade. This is the version of Tomato I was running prior to the attempted upgrade.
    Won't try again without knowing if it should work.
    --bill
     
  2. teddy_bear

    teddy_bear Network Guru Member

    No, the regular 2.4-kernel based USB mod does NOT work on any router with MIPS release 2 CPU. For Asus RT-N16, RT-N12, Netgear WNR3500L, use the 2.6-based mod from this thread.

    The current version - beta05 - is newer than the one you're using.
     
  3. myersw

    myersw Network Guru Member

    Thanks for the info, teddy_bear. Love Tomato and your mod for the RT-N16 and Vectek's for my WRT54GL.
    I'll look into the beta05.
    Don't know how you folks do it, but I am glad you can and do!
    --bill
     
  4. myersw

    myersw Network Guru Member

    Thanks again teddy_bear. I have just put beta5 on the RT-N16. I did see one post about dropping ppoe connection. Will keep you posted if I experience this problem on the regular thread.
    --bill
     

Share This Page