1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Dual WAN, second WAN as WIFI Client to Hotspot

Discussion in 'Tomato Firmware' started by ZnidaXP, Dec 13, 2017.

  1. ZnidaXP

    ZnidaXP New Member Member

    I have EA6900 router with latest tomato by kille72.
    WAN1 is set as normal WAN port on the router.
    WAN2 is supposed to be a Wireless client but I cant get it to work.

    I set to Wireless client mode, SSID and WPA2 Key are all correct.
    I set WAN2 to DHCP and and Wireless Client mode to eth1.
    I see the connection for a brief second on Device list, but there is no connection and no speed and it dissapears on next refresh and then reappears.

    I only managed to get it working by setting eth1 to Wireless ethernet bridge, but then I lose HDCP of tomato router and I cant set my primary WAN1 and all the good stuff...

    I want to use WAN1 and WAN2 as a failover or maybe load balancing.

    The Wifi router is an Android phone with Hotspot. WAN1 is ADSL modem from ISP.

    I hope anyone understood me :)
     
    Last edited: Dec 13, 2017
  2. mauriga

    mauriga Reformed Router Member

Share This Page