1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Dyndns Compliance

Discussion in 'Cisco Small Business Routers and VPN Solutions' started by ed001, Oct 10, 2006.

  1. ed001

    ed001 Network Guru Member

    Does anyone know if the ddns client in the rv082 (1.3.2) complies with the DynDNS.org blocking policy (28-35)?
    It is not listed in the "certified" list

    Here is the policy
    http://www.dyndns.com/support/abuse.html

    Thanks
     
  2. Toxic

    Toxic Administrator Staff Member

    my rv042 works fine, that certified list is very small considering the amount of routers that are out in production.
     
  3. ed001

    ed001 Network Guru Member

    Glad to hear it. I only ask because I had a BEFVP41 that used to update every time it checked the IP and I would get blocked within the first day for abuse. Don't remember what firmware I was running though.
    Thanks.
    PS
    How long have you been using the 42 with DynDNS.org if you don't mind me asking?
     
  4. d__l

    d__l Network Guru Member

    I've used my RV082 with DynDNS.org for months with both 1.3.2 and 1.3.3.4 on two DSL lines without any problems whatsoever. I've had numerous PPPoE connection drops and reconnects during the course of testing various things this summer and some of the reconnects reacquired the very same IPs.

    If these firmwares were not functioning in compliance with their policies, I'm certain that I would have been blocked by DynDNS.org long ago.
     

Share This Page