DynDNS not updating with WAG54G V2.0 ANNEXB

Discussion in 'Other Linksys Equipment' started by bisiana, Jul 21, 2005.

  1. bisiana

    bisiana Network Guru Member


    I have configured DynDns on my brand new WAG54G v2.0 ANNEXB Eu Firmware Version: 1.00.23 , but it seams not updating when my public IP addrress changes. Username, password and host are correct . The status is showing : "DDNS is updated successfully".

    Does someone has an idea ? :( :(


  2. ReDFlaG

    ReDFlaG Network Guru Member

    upgrade to the latest beta firmware EU v1.01.01 that may correct your problem.
  3. bisiana

    bisiana Network Guru Member

    Hi ReDFlaG,

    Thank you for your proprosal, but it seams that the version v1.01.01 available on a polish distributor ftp is for WAG54G "ANNEXA" . Can I use it anyway on my ANNEXB version?

  4. jacob

    jacob Guest

    Same problem with FW

    I have exactly the same issue with my WAG54G V2 and the latest firmware: it only actually refreshes information right after boot, and does not do it again afterwards (although giving the message it did)...
  5. TazUk

    TazUk Network Guru Member

    Unfortunately not :( although I can confirm that v1.01.01 does fix the DDNS issue.
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice