1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

DYNDNS NOT WORK - Hyperwrt21b1v4.70.6Thibor Oct. 19 2005

Discussion in 'HyperWRT Firmware' started by GeneralTweety, Nov 6, 2005.

  1. GeneralTweety

    GeneralTweety Network Guru Member

    Hello to all.
    Maybe somebody can help me.

    I am very statisfied with the work from thibor.

    Everything works fine, without my dyndns updater from the firmware.

    I am using pptp connection via AON (Austria) so I am automatically reconnecting every 8 hours. So I am using Dyndns for this.

    I am entering

    User name, Password, Host Name

    and the router is telling me that the update is succesfully

    but nothing happens on the dyndns page.

    If am trying to put an invalid dyndns domain the router is telling me. dyndns domain is not available. So the connection must be there.

    HAS ANYBODY ALSO THIS PROBLEM?
    IF NOT.
    WHAT IS WRONG WITH MY ENTRIES?

    Thx to all which are helping me.

    Best regards



    Generaltweety
     
  2. Thibor

    Thibor Super Moderator Staff Member Member

    tbh tweety, i've not recieved any reports that dyndns isn't working, and i haven't changed any part of the dyndns code from the stock sources. i personally, have never used or tested dyndns. Perhaps somebody could confirm it's working?

    Carl.
     
  3. 4Access

    4Access Network Guru Member

    The last time I used DynDNS.com with the stock firmware was several months ago at least but it did work. Well mostly... the DynDNS.com feature in the WRT has had long standing limitations. It came up again recently in this thread.
     

Share This Page