1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.


Discussion in 'DD-WRT Firmware' started by someone_01, Aug 21, 2005.

  1. someone_01

    someone_01 Network Guru Member

    I´m looking for a way to update more then one dyndns accounts automatic (needed for hostheader resolving at local web services)
    Nvram seems to support this (ddns_xxx_2) but, how to use?
  2. 4Access

    4Access Network Guru Member

    I don't know the answer but here's the results of a brief test. First I entered the following info into the DDNS GUI:


    Then I checked the nvram variables and saw:

    Obviously the GUI doesn't use the ddns_xxx_2 variables so while I have no idea if it would work maybe you could simply try manually assigning values to the ddns_xxx_2 variables? BTW all the ddns_xxx_buf variables appear to store the previous value you entered into the GUI. For example, configure DDNS via the GUI and Save. Then configure different values & save again. Looking at nvram you'll notice that all the ddns_xxx_buf variables hold the values you saved the 1st time...

    Good luck and let us know how it goes!

Share This Page