1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

E3000 & Hurricane Electric IPv6?

Discussion in 'Tomato Firmware' started by Ronnie_USA, Dec 30, 2010.

  1. Ronnie_USA

    Ronnie_USA Networkin' Nut Member

  2. Ronnie_USA

    Ronnie_USA Networkin' Nut Member

    Toastman E3000 USB Ext & IPv6?

    Is there something else I must enable to get this to work?
     
  3. kaiser

    kaiser Networkin' Nut Member

    Ronnie_USA, any luck with IPv6?
    I'm using Shibby mod on my E2000 ant following a guide I found on this site, but still no luck :(
     
  4. Toastman

    Toastman Super Moderator Staff Member Member

    I am also having trouble getting this to work, last time I tried and was successful was several months ago. I know it can work because one of the posters on here who was helping to sort out the IPV6 routing bugs is using it OK, and has offered to assist me set it up. But he's away for a few days. S0 - it's something we are doing wrong, I think.
     
  5. kadrex

    kadrex Addicted to LI Member

    I had to use Custom URL under DDNS.
    https://ipv4.tunnelbroker.net/ipv4_end.php?ip=AUTO&pass=$MD5PASS&user_id=$USERID&tunnel_id=$GTUNID

    $MD5PASS
    I used http://www.md5hashgenerator.com/index.php and converted my password for login into website.

    $USERID
    I logged into the website, looked at source of the "Main Page". Search for "User ID".

    $GTUNID
    Under Tunnel Details page

    based on source:http://www.tunnelbroker.net/forums/index.php?topic=659.15
     
  6. phuque99

    phuque99 LI Guru Member

    I used Teddy's build and it works fine. The DDNS has a HE IPv6 tunnel option and that works too without the need for a custom URL. Unfortunately there isn't any logging for the IPv6 tunnel so one may need to turn on debug flags to log them.
     
  7. kaiser

    kaiser Networkin' Nut Member

    I tried to use custom DDNS url but still no joy :(
    Here's a few screenshots. Maybe someone will spot my mistake because I have no ideas. I've tried different MTUs.

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]
     
  8. lancethepants

    lancethepants Network Guru Member

  9. kaiser

    kaiser Networkin' Nut Member

    Yes, I've done that.
     
  10. lancethepants

    lancethepants Network Guru Member

    Just edited my response, try changing your MTU.
    If you receive you wan ip by
    DHCP -->1480
    PPPoE--> 1472

    Neither work. Try 1280.

    OK, see you've done that.
     
  11. kaiser

    kaiser Networkin' Nut Member

    I did try 0; 1480; 1472; 1280 several times when changing other settings.
     
  12. lancethepants

    lancethepants Network Guru Member

    A lot can depend on the mod your using. Atleast with Toastman, it seems to get constantly broken when adding features, then subsequently fixed, usually firewall stuff.
    I'm currently using Toastman's v1.28.7488.2, which seems to work

    The poster who responed on the guide was apparently using Shibby's though there isn't a revision mentioned.
    hmmm.. what else.
     
  13. kaiser

    kaiser Networkin' Nut Member

    To be honest I suspect the mod I'm using too. Because I've tried to change different settings many times and still no luck.
    Which Tomato mods are known to be working well with IPv6 (current releases)? Also do I have to reset my router when changing mods?

    P.S. D-Link Dir-615 I've used before worked with IPv6 "out of the box"... :-|
     
  14. lancethepants

    lancethepants Network Guru Member

    Yes, you should probably clear your nvram every time you change to a different mod or even revision. I personally know that Toastman's v1.28.7488.2 works. I beleive the 2 or 3 versions since this mod work too. I haven't used Shibby's maybe there is a newer one that would work.
     
    kaiser likes this.
  15. lancethepants

    lancethepants Network Guru Member

    Even clearing nvram with the current mod could potentially fix it. It seems like lots of issues can be resolved just by that.
     
  16. kaiser

    kaiser Networkin' Nut Member

    I think I'll try Tostman's mod.
    Thank you for your help, lancethepants.
     
  17. lancethepants

    lancethepants Network Guru Member

    Let us know if you get it going.
     
  18. kaiser

    kaiser Networkin' Nut Member

    On latest build of Toastman's mod IPv6 is working without problems.
     
  19. lancethepants

    lancethepants Network Guru Member

    Awesome!, thanks for the feedback.
     
  20. kaiser

    kaiser Networkin' Nut Member

    No, thank you, lancethepants. I almost gave up on IPv6 :)
     

Share This Page