Hello everyone, I know that my version of firmware does not include SNMP. Tomato Firmware 1.28.0000 MIPSR2-116 K26 USB Big-VPN But the issue is that I need it, but with the E3000 there is only 8 MB of Flash. I have tried manually installing SNMP off the USB stick on my router following this guide. Only difference is that I'm not using a network share. Using USB storage. http://systembash.com/content/how-t...router-firmware-and-graph-traffic-with-cacti/ I have no issue playing with command line, but for some reason the service just wont start. Anyone have any tips?