1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

E4200v1 Advanced Tomato performance results

Discussion in 'Tomato Firmware' started by gilali, May 9, 2014.

  1. gilali

    gilali Network Newbie Member

    Hello,
    I decided to flash my old router (WNR3500Lv1), working very well, because heartbleed bug (but i think was not concerned).
    In same time, i also decided to change my router by a newer one, E4200v1 (still old). I just discovered the wifi 5Ghz at home : very very cool !!
    So the results : (file transfert homemade tests)

    Last Stock firmware :
    FW_E4200_1.0.05.007_US_20120823_code.bin
    60MB/s wan to lan (about 500 Mbps !! ) (the real value may be faster, depending my hard drive writing speed, but i don't think so)
    52MB/s lan to wan


    Last AdvancedTomato Firmware :
    tomato-E4200USB-NVRAM60K-1.28.AT-RT-N5x-MIPSR2-1.24.17-AIO.bin
    14MB/s wan to lan
    13MB/s lan to wan
    VPN : 1200kB/s (0.95 CPU load)
    VPN : 450kB/s depending my isp (about 0.30-0.35 CPU load)

    Last Tomato by Shibby Firmware :
    tomato-E4200USB-NVRAM60K-1.28.RT-N5x-MIPSR2-117-AIO.bin
    tomato-E4200USB-NVRAM60K-1.28.RT-N5x-MIPSR2-117-AIO
    13.5MB/s wan to lan
    13MB/s lan to wan

    Last Toastman Firmware :
    tomato-E4200USB-NVRAM60K-1.28.0505MIPSR2Toastman-RT-N-VLAN-VPN-NOCAT.bin
    14MB/s wan to lan
    13MB/s lan to wan

    Comparing to my old Netgear WNL3500Lv1
    Tomato Firmware v1.28.7493 MIPSR2-Toastman-RT K26 USB VPN
    13MB/s wan to lan
    13,5MB/s lan to wan
    VPN : 800kB/s (0.95 CPU load)
    I just flashing it to last AdvancedTomato FW.
    Results comming soon.

    Regards,
     

Share This Page