1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

E900 and 802.1x wired authentication on WAN?

Discussion in 'Tomato Firmware' started by xternal7, Oct 14, 2013.

  1. xternal7

    xternal7 Reformed Router Member

    I have a Linksys E900 router and I'm trying to connect to a wired network that uses TTLS/PEAP authentication.

    I've been searching the internet for how-tos for quite a while and the best approximation I've found is this: https://forum.openwrt.org/viewtopic.php?pid=107300. Yeah, I noticed this tutorial is meant for OpenWRT, but I've googled some more and found that you can install a package manager on Tomato as well, which I did (yes, that includes getting myself some persistant network storage) and continued to follow the tutorial (with modifications I assumed were needed, such as using different directories). I've managed to follow the tutorial up until the 5th step, which is where I get stuck as there seems to be no suitable driver or interface (vlan2 interface appears to be the closest match for WAN port) for wpa_supplicant to run.

    Any help on how to get wpa_supplicant to do its job would be extremely welcome.

    OpenWRT is not an option as [OpenWRT] has no drivers for the wireless core of my router.
     
  2. Locutus

    Locutus Reformed Router Member

    I have the same problem on my RT-N16 with Shibby's Tomato build. Any guidance on how to install wpa_supplicant would be great.
     

Share This Page