1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Enable SNMP on NAS200

Discussion in 'Cisco/Linksys Network Storage Devices' started by alkocelj, Nov 4, 2010.

  1. alkocelj

    alkocelj Guest

    Is it possible to enable SNMP on NAS200 with jac4 firmware?
    Did someone did that?

    Alex
     
  2. jac_goudsmit

    jac_goudsmit Super Moderator Staff Member Member

    You can't simply enable or disable it; You need to compile and run snmpd or net-snmp or something...

    In other words it's possible but I don't know if you want to go through the trouble of doing it...

    ===Jac
     
  3. DJ Soulfly

    DJ Soulfly Addicted to LI Member

    +1 I know i want to get this baby on the run to monitor the traffic incoming and outgoing trough cacti. I've compiled a couple of times net-snmp but i am stuck with the necessary library's to run it. I didn't have the time to fix that but I've a link to my compiled files which i happy to share maybe someone is getting warm after this

    http://www.filedump.net/dumped/snmpnas200targz1295874072.zip
     

Share This Page