1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Entware query

Discussion in 'Tomato Firmware' started by paped, Apr 27, 2014.

  1. paped

    paped LI Guru Member

    Hi,
    Just after some advice, I am running Shibby K26USB VPN 117 build on an Asus RT-N16 and I have installed Entware with the snmpd package on to an attached ext3 formatted USB stick, so I can continue using MRTG with my router.

    However I have a query, both Entware and snmpd are working as expected but the USB stick seems to be constantly being accessed and I am wondering if this is normal or is there some logging/process etc. that I need to turn off or alter somehow to reduce the writes/reads?

    I have been doing some searching but cannot find anything obvious or installation wise beyond what I have already done. However with the access light continually flashing on the stick, I am not sure how long it's going to last....

    Thanks for any advice in advance,

    Paped
     

Share This Page