1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

ERROR:Fail to get samba information

Discussion in 'Cisco/Linksys Network Storage Devices' started by offlink, Sep 2, 2007.

  1. offlink

    offlink LI Guru Member

    i have big problem. i've opening the case and drop battery from inside, but plugged in immediately, but after when i log in to www i have that comunicate and nothing can do...ERROR:Fail to get samba information

    i try upgrade oother firmware from REDBOOT - original linksys,unslung 6.8-nothing always the same info...even try save setting not working...plesae help me!

    [​IMG]
     
  2. Toxic

    Toxic Administrator Staff Member

    I dont know the inside of a NSLU2 but what type of battery is it? if it has been removed my guess it that the battery is either in the wrong way or the SLUG has lost all of its settings due to the battery being removed.
     
  3. offlink

    offlink LI Guru Member

    the battery is inside ok. but NSLU has lost all of its settings due to the battery being removed and now if i save setting nothing has happend.

    samba not working, ftp not working - only www but always i have that comunicate...
     
  4. Toxic

    Toxic Administrator Staff Member

    apparently this should fix your issue

    http://linksys.custhelp.com/cgi-bin...SZwX3NlYXJjaF90ZXh0PU5TTFUy&p_li=&p_topview=1

    this was from another site:

     
  5. offlink

    offlink LI Guru Member

    yes yes yes! it works! thank you so much!
     
  6. Toxic

    Toxic Administrator Staff Member

    glad to be of service :)
     

Share This Page