1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Ever set up VPN: IPSecuritas -> WRT54G(V1) -> RV082

Discussion in 'Cisco Small Business Routers and VPN Solutions' started by rainerkormann, Jun 22, 2006.

  1. rainerkormann

    rainerkormann LI Guru Member

    Hi Gurus!

    Please help. Im new with VPN and need advice with following setup:

    - VPN-Software-Client IPSecuritas on a Mac-OS 10.4.6
    - WRT54G-DE (Version 1, Firmware v3.03.2.de), VPN-Passtrough
    - Internet :)
    - RV082 VPN-Gateway
    - Remote-LAN

    Mac and WRT54G are connected by wire, the WRT54G is configured with IPSec-Passtrough.

    It all ends with following Logentry on the RV082:
    '...Cannot respond to IPsec SA request because no connection is known for 192.168.8.80/32(IP RV082, LAN)===(statische IP RV082, WAN)...(dynamische IP WRT54)(E-Mail Authentification)===192.168.1.75/32(IP VPN-Client)...'

    Did anyone ever managed this Setup? Im trying for days now, searched the Web all over - but no help.

    Thanks in advance,
    Rainer.
     
  2. rainerkormann

    rainerkormann LI Guru Member

    Hi,

    i still havent fixed my problem.
    Can anyone help? Did i miss to post relevant information? Did i choose the wrong forum?

    I guess(!) that the part "...no connection is known..." in the rv082-logs is pointing to some NAT-problem. But i dont know how to solve.
    Any idea, what i should try?

    Many thanks in advance!
    Rainer.
     

Share This Page