1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Extending the antenna on WMP54G

Discussion in 'Other Linksys Equipment' started by blank, Aug 12, 2004.

  1. blank

    blank Network Guru Member

    My WMP54G n/w card is sitting at the back of a tower machine housed in a desk. Not the greatest of positions, I agree. Is there any sort of cable that will take the antenna up away from the back of the machine so that it presents a better line of sight to the Gateway (WAG54G)? Or can anyone reccomend a good internal third party antenna that will fit the WMP54G?

    Tx

    Blank
     
  2. jdepew

    jdepew Administrator Staff Member Member

    Hi,

    There are many types of solutions available - what is important is the connector type. The WMP54G uses a RPSMA type connector - You can get various cables or bundles that include a higher gain antenna as well -

    here's an example - http://www.hdcom.com/bundles.html#HD19654
    Jim
     

Share This Page