1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

fatal bug tomato VPN 2.8 beta

Discussion in 'Tomato Firmware' started by capcase, Jul 10, 2011.

  1. capcase

    capcase Networkin' Nut Member

    I have a Asus RT-N16, with 2.8 Beta VPN R2 firmware : tomato-K26USB-1.28.9054MIPSR2-beta-vpn3.6 if the wireless
    is set to B/G mixed. the whole router will be locked up, no wire/wireless access any more. can't access 192.168.1.1. the only way is holding on wps button & plugging power cable at the same time to reset.
     
  2. xtacydima

    xtacydima LI Guru Member

    did you put tomato on via dd-wrt -> tomato method?
    or did you use the ASUS recovery to put the tomato image on directly?
    In either case, did you do a thourough NVRam Wipe afterwards?

    I am using mixed mode myself and have no issues with it, but I am on build ( Tomato Firmware v1.28.7467 MIPSR2-Toastman K26 USB VPN ) so I dunno but maybe try going a few revisions back to see if that helps as well.

    Just a few thoughts of some basic steps I would start with.
     
  3. capcase

    capcase Networkin' Nut Member

    the issue was reproduced twice.

    - 1st case, my router was upgraded from prior version , which was installed long time ago and was flashed on dd-wrt or tftp, i don't remember any more.

    - 2nd case, flashed via asus recovery approach couple days ago and I did NVRAN wipe.

     
  4. xtacydima

    xtacydima LI Guru Member

    have you tried a diff version yet?
     

Share This Page