1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Firmware for WAG54GS (Annex B)

Discussion in 'Linksys Official Firmware' started by srytrj, Oct 23, 2006.

  1. srytrj

    srytrj Guest

    Hi,
    I use WAG54GS (Annex B) with 1.00.06 firmware, but Access Restriction doesn't work correct. I want try use latter firmware. All firmware which I found are only for Annex A. Are firmwares for Annex B too? Where can I download it?

    Thank you for your help,

    Jarda
     
  2. libraly

    libraly LI Guru Member

    I have the same modem with Firmware Version: V1.00.06

    Where to find newer one ?
     
  3. simmetje

    simmetje Guest

  4. racky29

    racky29 LI Guru Member

  5. skid7j

    skid7j LI Guru Member

    There is a general problem with the WAG54GS with firmware upgrading.

    You must update the firmware one step at a time using the firmware update page on the router

    Before updating, hard reset your router (put a pin in the back for 10 sec)

    Follow the list below which has been proven to work, starting from whichever version you currently have. DO NOT miss out any versions or you may run into problems. Remember to hard reset first and reboot between versions to ensure it goes without a hitch.

    • Hard Reset the router
    • Upgrade to 1.00.02
    • Reboot the router
    • Upgrade to 1.00.06
    • Reboot the router
    • Upgrade to 1.00.08
    • Reboot the router
    • Upgrade to 1.00.12
    • Reboot the router
    • Upgrade to 1.01.00
    • Reboot the router
    • Upgrade to 1.01.01

    To find the firmware files either email linksys or google them.
     
  6. SkwezelJuice

    SkwezelJuice Guest

    Thank god! I have this piece of **** (love):thumbdown: for around 1.6 years now, 1 years and 4 months in the desk and 2 months used.

    Thanks for the manual and updates!

    Still working without problems! (1-2 Months without reboot)
     
  7. ezervoud

    ezervoud LI Guru Member

    There is a new Annex B firmware 1.01.03, which can be downloaded from here
    Please note that the date posted is wrong, it should read 9/26/2007
     

Share This Page