1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Firmware for WAP54G - 3.08.02 (5/5/06)

Discussion in 'Other Linksys Equipment' started by LordFlux, Aug 30, 2006.

  1. LordFlux

    LordFlux Network Guru Member

    Just wanted to post that I found new firmware for the WAP54G unit on a foreign forum (located here: http://wireless.com.pt/forum/viewtopic.php?p=73329 ). It works just fine on both of my version 2 units, but that's not to say that it won't brick yours. Been running this firmware for about 3 days now and haven't had any problems.

    I mirrored the file on my personal site. Here's the link:

    http://users.nlamerica.com/dixiebai/temp/WAP54G_ETSI_3_08_02_fw.zip

    Here's the change log since the most recent US firmware update:

    Firmware Release History
    Project : Linksys WAP54Gv3

    What's new in release 3.08.02(ETSI) ? (2006/05/05)
    1) Linux source is based on 3.91.23.0
    2) CFE version is 3.91.39.0
    3) firmware date 2006, May 05, ETSI, v3.08
    4) hidden page : view30805052006.asp
    5) Fix WDS issue by Broadcom's new package .

    What's new in release 3.08.01(ETSI) ? (2006/05/03)
    1) Linux source is based on 3.91.23.0
    2) CFE version is 3.91.39.0
    3) firmware date 2006, May 03, ETSI, v3.08
    4) hidden page : view30805032006.asp
    5) Fix wireless channel display issue in EN version .

    What's new in release 3.05.03(ETSI) ? (2005/12/28)
    1) Linux source is based on 3.91.23.0
    2) CFE version is 3.91.39.0
    3) firmware date 2005, Dec 28, ETSI, v3.05
    4) hidden page : view30512282005.asp
    5) change firmware version to ISO format that Linksys request .

    What's new in release 3.05.02(ETSI) ? (2005/12/13)
    1) Linux source is based on 3.91.23.0
    2) CFE version is 3.91.39.0
    3) firmware date v3.05, Dec 13, 2005, ETSI
    4) hidden page : view30512132005.asp
    5) fix Mac filter issue.

    What's new in release 3.05.01(ETSI) ? (2005/12/09)
    1) Linux source is based on 3.91.23.0
    2) CFE version is 3.91.39.0
    3) firmware date v3.05, Dec 9, 2005, ETSI
    4) hidden page : view30512092005.asp
    5) Base on 3.02.03 ETSI firmware , fix Backup/Restore issue .
     
  2. LordFlux

    LordFlux Network Guru Member

    Also, there's a 1.17 firmware for the WAP54GX on the http://www-be.linksys.com website. Someone posted before that they received a beta version of the 1.17 firmware that fixed the VPN issue, but caused problems with the rest of their devices. I have the 1.17 firmware from the website on both of my WAP54GX units and have 2 laptops, WPS54G, WGA54G, WRE54G, and a WAP54G (Client) connected between the two of them and have not had any problems.
     
  3. Deimdos

    Deimdos Network Guru Member

    ETSI is the european firmware
     
  4. LordFlux

    LordFlux Network Guru Member

    Yup, it sure is.
     
  5. Deimdos

    Deimdos Network Guru Member

    well, yesterday I put this firmware in my WAP54Gv1, and the web interface seems to run better that with 3.05.03, it seems to run more light... I have to test the WDS with my WRT54GL.
     
  6. collen

    collen LI Guru Member

    Does this fix the problem enable/disable ses button ??
     
  7. Subah

    Subah Network Guru Member

    Where can i find this firmware ?
     
  8. Subah

    Subah Network Guru Member

    hello !!
     
  9. Deimdos

    Deimdos Network Guru Member

  10. Subah

    Subah Network Guru Member

    Thanks a lot Deimdos for helping me , what do you think of this firmware ? is it good one ?
     
  11. Deimdos

    Deimdos Network Guru Member

    When I used it in my WAP54Gv1 I remember that web interface worked faster in 3.08 than 3.05

    bye
     
  12. Subah

    Subah Network Guru Member

    Thank you again and have a nice week end
    bye :)
     

Share This Page