1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Firmware Linksys 4.20.7 WRT54G with WDS and power settings.

Discussion in 'Tarifa Firmware' started by jchuit, Sep 17, 2005.

  1. jchuit

    jchuit Network Guru Member

    Hello,

    I have build a new firmware, with an easy WDS setup and powersetting, this firmware is for the WRT54G only (models v1 to v4).

    Added rc_startup en rc_shutdown
    updated busybox 0.6 to 1.0
    added passwd and group security to kernel
    added telnetd
    added full wds support with easy setup webpage
    added power setting in webpage

    date 17 sept 2005: Tarifa B003
    linksys source: WRT54G_4.20.7 US, 11 channels

    If you have problems or questions, you can post them as a reply.

    Greetings
    Jchuit


    http://members.chello.nl/j.huitema2/WRT54G/Tarifa003.ZIP


    http://members.chello.nl/j.huitema2/WRT54G/Tarifa003.doc
     
  2. DutchGreg

    DutchGreg Guest

    Hoi Jelle,

    Ik zag in je txt bestand dat je hem alleen getst hebt op een 2.0 en 2.2 model. Ik zelf heb de 3.1 versie. kan ik hem zonder problemen gebruiken? Ik wil alleen het zend vermogen iets opvoeren!!

    Will
     
  3. jchuit

    jchuit Network Guru Member

    To Will

    Yes, it´s for all versions, including V3 and V4.

    Jchuit
     

Share This Page