Hi, I fight with this for days now. So, if anyone could help, I'd really appreciate This is a schematic of my current setup: And this is what I'd like to setup: -The isp router is in router mode, and its dhcp is affecting ip to all devices on the network. -The Time capsule is in bridge mode, and its wireless access point is the only one active. -The wl-500gp has tomato firmware 1.28 and ad block scipt. Basically, I want all 3 routers on the same network, keep the time capsule as the access point for its wifi-n ability, and use the tomato router QoS and ad-blocker for all devices connected to the time capsule. So far, I never managed to get all these devices on the same network and get all functionalities at the same time. -If I use LAN ports only on the tomato router, every devices are on the same network but as WAN port is not connected QoS and ad block are not working. -if I change the isp router to bridge mode, I lose airplay and "bonjour" abilities to connect to the NAS. -if I keep the isp router in router mode, and use also the tomato router dhcp, all devices connected to the time capsule are on a second network, and same problem, I lose airplay and "bonjour" abilities to connect to the NAS. So is there a way to configure the tomato router in bridge mode (not the wireless ethernet bridge mode), connecting its WAN port but keeping dhcp on the isp router ? Or any other solution? Thanks !