1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Flash my WRT with HyperWRT

Discussion in 'HyperWRT Firmware' started by renaud-twingo, Dec 10, 2004.

  1. renaud-twingo

    renaud-twingo Network Guru Member

    I have a WRT54G v1.1 with an official linksys v2.04.4 firmware.

    Because I prefer stability to functionality which firmware do you recommend:
    - Linksys v2.04.4
    - Linksys v3.01.3
    - HyperWRT v2.0b3
    - Sveasoft Alchemy

    I would like to try HyperWRT firmware but before doing it I have some questions:
    - HyperWRT v2.0b3 last released is based on v3.01.3 Linksys firmware, is it the most stable release?
    - If I flash my WRT54G with the HyperWRT v2.0b3 firmware, is it possible to flash it back with original v3.01.3 or v2.04.4 Linksys firmware or any Sveasoft firmware?
  2. 4Access

    4Access Network Guru Member


    When it comes to stability you will probably get different answers from different people. I've used stock Linksys firmware, Sveasoft, & HyperWRT (though not all the specific versions you asked about) and haven't noticed any "stability" problems with any of them. Are you having problems you're trying to resolve?
  3. renaud-twingo

    renaud-twingo Network Guru Member

    No, I only tried official Linksys firmware. But I was wondering if non official firmware could affect the stability.
    So, if it is possible to come back to a previous version, I will try HyperWRT firmware.

Share This Page