1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Flashing to thibor

Discussion in 'HyperWRT Firmware' started by jagheterfredrik, Jan 11, 2006.

  1. jagheterfredrik

    jagheterfredrik Network Guru Member

    My router (WRT54GSv4) i 2 days old and i'd really like not to brick it.
    Right now i have DD-WRT but it's not working very good at all.
    So, If i want to flash to thibor's HyperWRT is it just to do it through the Management -> Flash ? Or do i have to do something more?
  2. mikez

    mikez Network Guru Member

    i did EXACTLY what you want to do.
    i was running dd-wrt, then i upgraded to thibor
    all you have to do is go in the management tab and then to the upgrade the firmware tab.
    and you then load the firmware, and your done.
    it's as easy as that.
    my experience with thibor is that it is much more stable than dd-wrt.
  3. Thibor

    Thibor Super Moderator Staff Member Member

    wait a short while before flashing, my new release(Thibor12) will be posted shortly
  4. vong

    vong Network Guru Member

    thibor 12 is coming. Wow :thumbup:
  5. YogSothoth70

    YogSothoth70 Network Guru Member

    I always use the Linksys TFTP utility. If you attempt to flash a firmware that is incompatible with your router, if will let you know immediately ("Wrong code pattern").

Share This Page