1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

[Fork] Tomato by Shibby, compiled by @kille72

Discussion in 'Tomato Firmware' started by kille72, Mar 24, 2017.

  1. Edrikk

    Edrikk Network Guru Member

    Not sure if this is the reason or not, but you're missing a "break;" between

    set_r8000_vars();

    and

    case MODEL_AC15:



    As it stands R8000 might brick loading this I would think, since it just rolls into AC15 code and overwrites the settings with those for AC15.

    Sorry this is as much as I can help on this.
     
    kille72 likes this.
  2. Nitin Vaid

    Nitin Vaid Connected Client Member

    but i am using tomato firmware why create a new thread? if there is no script for tomato then its okay...
     
  3. dc361

    dc361 LI Guru Member

    We understand that you are using the firmware but this thread specifically is to discuss @kille72's variant where your question about scripts is more of a generic/any build question. More people would see your request than those just working with current issues in kille72's builds.

    I'm not a scripting expert, but as far as I know it should be able to create a custom script to turn the 2.4GHz radio on and off at specific times (Using the script + the ADMINISTRATION->Scheduler feature of the firmware.
     
  4. kille72

    kille72 Addicted to LI Member

    It works like I wrote earlier https://www.linksysinfo.org/index.p...-compiled-by-kille72.73397/page-7#post-288902, the same theory as you:

    Code:
    +        }
    +        break;
    Cheers!
     
    The Master, M_ars and Edrikk like this.
  5. PetervdM

    PetervdM Network Guru Member

    just loaded tomato-R8000-ARM--2017.2b43-kille72--AIO-64K and it seems to be OK. have to do some additional testing.
    one small thing catched my eye, the wait time after flashing before reboot is finished is way to short for a R8000. any chance it can be raised to 150 seconds?
     
    btaroli likes this.
  6. Sean B.

    Sean B. Addicted to LI Member

    You're welcome. I take it the speeds you're seeing now are satisfactory?
     
    M_ars likes this.
  7. kille72

    kille72 Addicted to LI Member

    If anyone wants to help with tests, version 2017.2b43 ARM is ready for download (only AIO, except AC15):

    ***DELETED***

    Look especially at:
    • minidlna 1.2.0 (flac, ogg, png etc)
    • OpenVPN 2.4.3 + new LZO
    • 4g
    • Tenda AC15 support
    • Linksys EA6300V1/EA6400 support
    • SMB2
    • dnsmasq 2.77
    • dnscrypt-proxy 1.9.5
    • dropbear 2017.75
    • tor 0.3.0.8
    • QOS, both IPv4 & IPv6
    • GUI
    To-do:
    • Wireless Client
    • PPTP klient
    • Radius/WPA2 Enterprise
    Cheers!
     
    Last edited: Jun 25, 2017
  8. kille72

    kille72 Addicted to LI Member

  9. Nitin Vaid

    Nitin Vaid Connected Client Member

    limit the bandwidth of selected connected device IP Timely? is it possible?
     
  10. Nitin Vaid

    Nitin Vaid Connected Client Member

    i have switched to xwrt merlin just becouse of the week wifi signals@5ghz but with in 1hour i switched back on this firmware.. was missing the customisation and feaures for me it was like signal vs features:D
     
    kille72 likes this.
  11. Nitin Vaid

    Nitin Vaid Connected Client Member

    i just have to upgrade it? right? no need to erase the data
     
  12. kille72

    kille72 Addicted to LI Member

    No need to erase NVRAM 2017.1 -> 2017.2b43.
     
  13. rs232

    rs232 Network Guru Member

    I don't know how to tell you in other words: do not post here your generic tomato questions.
    You don't seem to understand...
    Please open your own thread.
     
    AndreDVJ likes this.
  14. zdravko1972

    zdravko1972 New Member Member

    Hello,
    just loaded tomato-EA6400-ARM--2017.2b43-kille72--AIO-64K but i haven`t internet access on wired connection... wireless is ok
     
  15. kille72

    kille72 Addicted to LI Member

    Log in into router and erase NVRAM: Administration - Configuration - Restore Default Configuration - Erase all data in NVRAM memory
     
  16. pomidor1

    pomidor1 Reformed Router Member

    kille72 likes this.
  17. Nitin Vaid

    Nitin Vaid Connected Client Member

    you already replied me yesterday to create a new thread why quote me again... Sorry if i am hurting anyone here
     
  18. rs232

    rs232 Network Guru Member

    because after we asked you to open a new thread you posted here again. So obviously this was not clear to you.
    Having said that enough for myself on this topic.
     
  19. zdravko1972

    zdravko1972 New Member Member


    Yes i`m try but still the same.......... i install modded CFE maybe it`s the problem ?
     
  20. kille72

    kille72 Addicted to LI Member

    @iv7777: what do you think?
     
  21. kille72

    kille72 Addicted to LI Member

    Can someone with Netgear R6400 test version 2017.2b43 please?
     
  22. cyber062

    cyber062 Serious Server Member

    Model : R7000
    firmware : tomato-R7000-ARM--2017.2b43-kille72--AIO-64K.trx

    Bug:

    APC UPS Status
    /tmp/.wxaGQjYz: line 5: ./ext/cgi-bin/tomatoups.cgi: not found
    APC UPS Response
    /tmp/.wxbYV9Ze: line 5: ./ext/cgi-bin/tomatodata.cgi: not found

    and

    The router doesn't see my printer and usb key.
    Back to 140 shibby, all it ok
     
  23. kille72

    kille72 Addicted to LI Member

    Intressting, do you have APC UPS? Have you cleared NVRAM and cache in your browser?

    1.png 2.png
     
  24. chchia

    chchia LI Guru Member

    hi kille72, ever since updated to b43, my log is full of

     
  25. kille72

    kille72 Addicted to LI Member

    @RMerlin wrote on another forum:
    "It means a high number of TIME_WAIT state connections. Can happen in theory if you are being bombarded with connection attempts, or if you are using a client that establishes a lot of connections (think Bittorrent) and either the client has been closed (leaving to many remote peers trying to connect to you), or you are trying to connect to a lot of unreachable peers."

    Show us result from this command: "nvram get ct_tcp_timeout"
     
  26. chchia

    chchia LI Guru Member

    the result is


    root@R7000:/tmp/home/root# nvram get ct_tcp_timeout
    0 2400 120 60 120 120 10 60 30 0
     
  27. Mercjoe

    Mercjoe Network Guru Member

    Flashed your beta b43 onto a R7000 and it was working pretty well.

    One thing I did note:

    QOS graphs are not working. I got a 'SVG not supported by browser' in each of the places a pie graph would normally be.

    Flashed back to shibby 140 and graphs worked as normal.

    This is more of a visual defect as QOS was working and catching the IPv6 that it was missing before.

    I do have a question for the future. I know your fork is off of Shibby's base code. Do I need to clear NVRAM if I swap back and forth between your and his firmware? I did it this time but it is something of a pain.
     
  28. Sean B.

    Sean B. Addicted to LI Member

    In the routers web interface go to Advanced->Conntrack/Netfilter and click Count current across from the Maximum Connections box. This will populate a count on each line for connections. Note the amount next to Time Wait. If this number is high then either you have an issue with a client causing excessive connections being unused or you're torrenting like a madman. If so, reduce the value in the Time Wait box.. try cutting it in half and see if that helps.. continue lowering if improvement noticed but not enough. If you notice any issues such as idle connections disconnecting fast enough to be a problem.. raise the value back up in steps.
     
    kille72 likes this.
  29. kille72

    kille72 Addicted to LI Member

    Edit: You right, some graphs are missing...

    Screenshot at 2017-06-24 21-53-07.png

    How about graphs in 2017.1?
     
    Last edited: Jun 24, 2017
  30. iv7777

    iv7777 Connected Client Member

    I guess it's the cfe to blame. Loaded to at least 5-6 ea6300v1 and no problem. By the way, I use xvortex cfe with ea6300v1 nvram variables. If accidentally used one that comes with ea6700 or EA6900, for sure some problem will come up. Another possible reason is the thermal issue that may exists in many ea6300v1. The CPU is not in good contact with the heat sink and the router may hang or have unexpected behavior. Have to open it up and shorten the two legs a little bit and put the heat sink back on. The normal CPU temperature should not be higher than 80 degrees Celsius.


    Sent from my iPhone using Tapatalk
     
    btaroli and kille72 like this.
  31. Mercjoe

    Mercjoe Network Guru Member

    To be honest, I do not know. I moved from Shibby 140 to Kille72 2017.2b43.

    Anyone else?
     
  32. Sean B.

    Sean B. Addicted to LI Member

    Hey guys, anyone seen a "cannot find -lgmp" error from ld during compile? It appears Shibby an @kille72 builds require some different packages than the Toastman source I'm used to, perhaps I missed one. Trying to run a build with modified nf_nat_rtsp and nf_conntrack_rtsp source to extract the kernel modules for troubleshooting @joksi 's streaming issue.
     
    joksi likes this.
  33. Magnus

    Magnus Network Newbie Member

    Hi guys! I tested the speed on USB 3.0 firmwares from ASUS, Merlin and Tomato. I noticed that on all firmwares from ASUS, Merlin, Hgg speed 46-52 MB\s, but in all modifications of the Tomato the speed doesn't exceed 25 MB\s. That suggests that the USB 3.0 driver on Tomato and other works slower. Could the author of a topic attach the USB3 driver from Merlin to Tomato? By the way CTF did not help (ASUS AC56U)
     
  34. kille72

    kille72 Addicted to LI Member

    My environment (Debian 8.8-x64):
    Code:
    1// install base packages with all depends
    sudo apt-get update
    
    sudo apt-get install build-essential autoconf m4 bison flex g++ libtool sqlite gcc g++ binutils patch bzip2 make gettext unzip zlib1g-dev libc6 gperf sudo automake groff
    sudo apt-get install lib32stdc++6 libncurses5 libncurses5-dev gawk gitk zlib1g-dev autopoint shtool autogen mtd-utils gcc-multilib gconf-editor lib32z1-dev pkg-config libssl-dev automake1.11
    sudo apt-get install libxml2-dev intltool libglib2.0-dev libstdc++5 texinfo dos2unix xsltproc libnfnetlink0 libcurl4-openssl-dev libxml2-dev libgtk2.0-dev libnotify-dev libevent-dev mc git
    sudo apt-get install texlive
    
    2// remove it if installed. It stopped PHP compilation.
    sudo apt-get remove libicu-dev
    
    3// install i386 elf1 packages
    sudo dpkg --add-architecture i386
    sudo apt-get install libelf1
    
    4// install required automake packages 1.11 and 1.14
    Remove first all automake packages:
    sudo apt-get remove automake
    Download:
    https://ftp.gnu.org/gnu/automake/
    unpack
    sudo ./configure
    sudo make
    sudo make install
    
    5//Remove libtool:
    sudo apt-get remove libtool
    Install 2.4.2:
    https://ftp.gnu.org/gnu/libtool/
    unpack
    sudo ./configure
    sudo make
    sudo make install
    
    6//Ddownload pkg-config 0.28 (0.26?)
    https://pkgconfig.freedesktop.org/releases/
    Don't remove other pkg-config
    unpack
    sudo ./configure
    sudo make
    sudo make install
    
    7// if version of installed bison is 3.0 or higher you have to install older one! PHP support only <3.0
    sudo apt-get remove bison libbison-dev
    
    wget http://launchpadlibrarian.net/140087283/libbison-dev_2.7.1.dfsg-1_amd64.deb
    wget http://launchpadlibrarian.net/140087282/bison_2.7.1.dfsg-1_amd64.deb
    sudo dpkg -i libbison-dev_2.7.1.dfsg-1_amd64.deb
    sudo dpkg -i bison_2.7.1.dfsg-1_amd64.deb
    sudo apt-mark hold libbison-dev bison
    
    sudo apt-get install libelf1 libelf-dev:i386 libelf1:i386
    sudo updatedb
     
    Last edited: Jun 25, 2017
  35. pedro311

    pedro311 Connected Client Member

    What is your browser?
     
  36. kille72

    kille72 Addicted to LI Member

    Chrome, FF, IE print screen:

    Chrome.PNG FF.PNG IE.PNG
     
  37. The Master

    The Master Network Guru Member

    @kille72 Here with a R7000 new Beta and Multiwan enabled, with a USB Stick 4G (Provider drei.at)Wan2 and Wan1 Cable. The USB Modem is not working anymore. Tomato could not find it. With your older builds there was no Problem.

    Tried serveral Reboots disbaled USB Disbale Multiwan ... Nothing works :(. Has anybody the same problem? The only thing that i dont trie is NV Reset :(
     
  38. kille72

    kille72 Addicted to LI Member

    @pedro311: what do you think? Your last change in 4g?
    https://bitbucket.org/kille72/tomato-arm-kille72/commits/ea00764a7e116de3e9cbf3bb1a0e324c73bf4347
     
  39. kille72

    kille72 Addicted to LI Member

    Bugs, bugs, bugs, and no time ;) I have deleted all beta versions, use v2017.1 or v140...
     
    gffmac likes this.
  40. The Master

    The Master Network Guru Member

    Ok flashed old v2017.1 over the beta and TATA.... LTE Works again.
     
    kille72 likes this.
  41. M_ars

    M_ars Network Guru Member

    up and runnuning with AC56U see anon http://anon.groov.pl/index.php?version=2017.2b43
    • IPv4 & IPv6 Dual Stack without Qos and dnsmasq 2.77 -> working so far (10 - 15 devices)
    • OpenVPN Server -> working so far (2 remote clients connected)
    • SMB2 -> working so far
    • GUI -> looks good so far

    What i see in the log file is:
    Code:
    Jun 25 14:25:19 RT-AC56U kern.warn kernel: br0: received packet on vlan1 with own address as source address
    Jun 25 14:27:25 RT-AC56U kern.warn kernel: br0: received packet on vlan1 with own address as source address
    Jun 25 14:29:30 RT-AC56U kern.warn kernel: br0: received packet on vlan1 with own address as source address
    Jun 25 14:31:36 RT-AC56U kern.warn kernel: br0: received packet on vlan1 with own address as source address
    
    is coming up and up... but i think that has nothing to do with your build :)
     
    kille72 likes this.
  42. Mercjoe

    Mercjoe Network Guru Member

    Relax.. take some time off and enjoy yourself. You have moved the needle HUGELY in the under the hood items and made some significant improvements IMHO.

    Bugs are going to happen. I like the way you released something you KNEW was going to have bugs and let us, well, tear it apart and tell you those bugs. For that I thank you. I like testing things.
     
    edusodanos, pomidor1, M_ars and 2 others like this.
  43. The Master

    The Master Network Guru Member

    New Funktions + Bugs = FUTURE

    So keep up the very good work. And in other words: A BETA is A BETA is a BETA :D
     
  44. Edrikk

    Edrikk Network Guru Member

    With all respect, I'm not sure I agree with this.
    This beta fixes a lot more widely used items than things that it broke.

    People installing something (especially one specifically called beta) are wise enough to choose to roll back to "stable" if a critical functionality for them is broken. ;)

    I argue that unless it caused bricks, no need to remove. :)
     
    edusodanos, AndreDVJ, Mercjoe and 2 others like this.
  45. Elfew

    Elfew Network Guru Member

    I agree with @Edrikk - thats why you tag these releases as beta :)
     
    kille72 likes this.
  46. kille72

    kille72 Addicted to LI Member

    Ok thanks guys! We will try to fix some bugs and then it's time for the next beta...

    Where are @Toastman , @shibby20 and @koitsu? ;P
     
    Darkbing and pomidor1 like this.
  47. kthaddock

    kthaddock Network Guru Member

    Elfew, kille72 and M_ars like this.
  48. Edrikk

    Edrikk Network Guru Member

  49. kthaddock

    kthaddock Network Guru Member

  50. Sean B.

    Sean B. Addicted to LI Member

    What is the path addition for Shibby? Toastman uses a symlink for /opt/brcm-arm -> ~/tomato/release/src-rt-6.x.4708/toolchains/hndtools-arm-linux-2.6.36-uclibc-4.5.3 and adds /opt/brcm-arm/bin to the path .. is it the same?
     
  51. skoub

    skoub Network Guru Member

    I played with all the settings i could found and heres the one that had a real impact on the speed:

    • Bluetooth coexistence enabled (passed from ~15mb to ~32mb in download speed from my nas)
    • Frameburst enabled (passed from ~32mb to ~39mb)
    • CTF is slowing down the transfert for about 1-2mb)

    Well, ~39mb is really good and near the transfert that i would get with the original firmware. Sometimes, the transfert will drop from a few seconds and come back to 39mb. But it's good for me.

    Why do i need to enabled these 2 params to get a good speed? The first one is easy to understand. I have a bluetooth device near my computer so maybe the signal was intercepted by the wifi signal.

    thank you for your time!
     
  52. joksi

    joksi Serious Server Member

    Isnt CTF only affecting WAN to LAN routing?
     
  53. Sean B.

    Sean B. Addicted to LI Member

    Bluetooth operates on 2.4ghz and can collide with 2.4ghz Wi-Fi. Bluetooth interference is not a product of the firmware, and Bluetooth coexistence ( Bluetooth interference avoidance ) is not enabled by default as it adds overhead and can reduce speed if it's not actually needed.

    Frameburst effectiveness is hardware dependent on the client side. This can also cause issues if enabled when clients don't support it or when more than just a few clients are connected at a time.. hence not enabled by default.

    CTF will not slow down anything.. 1-2mb is margin of error.

    3rd party firmware such as Tomato opens up user control of many settings allowing for customization. This can easily result in a worse-than-OEM experience if the user doesn't understand or know what they're doing ( no disrespect ). It is also able to be used on a wide range of routers and their hardware.. so the default settings can only be "averaged" by the model it's on and what "most" basic setups will need. It's up to the user to configure it properly for their specific hardware and networking environment.
     
    Last edited: Jun 26, 2017
  54. pedro311

    pedro311 Connected Client Member

  55. kille72

    kille72 Addicted to LI Member

    @The Master: logs please :)
     
  56. pedro311

    pedro311 Connected Client Member

    OK, it's fixed in last commit.
     
    kille72 likes this.
  57. kille72

    kille72 Addicted to LI Member

    I will compile a test version to @The Master
     
  58. tvlz

    tvlz LI Guru Member

  59. Elfew

    Elfew Network Guru Member

    @tvlz - thx!

    @kille72 - lets make a conclusion
    - USB 4G stick issue is fixed (http://www.linksysinfo.org/index.ph...-compiled-by-kille72.73397/page-8#post-288962)
    - QoS graphs are still bugged, needs to be fixed - regression - http://www.linksysinfo.org/index.ph...-compiled-by-kille72.73397/page-8#post-288961
    - APC UPS and USB printer/USB key are not working - I am not sure if it is an issue or just bad configuration (no NVRAM reset) - http://www.linksysinfo.org/index.ph...-compiled-by-kille72.73397/page-8#post-288940 - is there anybody who can test UPS and USB printer?

    About PPTP issue, @iv7777 tested tsynik build with related changes - it works fine
     
    cyber062 and kille72 like this.
  60. The Master

    The Master Network Guru Member

    Test Version 1+

    LTE is up and Running. THX (to all)

     
    gffmac and kille72 like this.
  61. kille72

    kille72 Addicted to LI Member

    VoilĂ ! Thx @tvlz !

    qos.PNG

    "New/modified" GUI by @pedro311 don't support IE11: "Your browser does not support SVG". We are aware of this and recommend to use more modern web browsers.
     
    Last edited: Jun 26, 2017
  62. kille72

    kille72 Addicted to LI Member

    2 problems gone, good work tonight guys!!!
     
  63. skoub

    skoub Network Guru Member

    Interesting to see that the Bluetooth coexistence enabled does help me on the 5ghz speed when it's only collide with the 2.4ghz.

    Anyway, i wanted to have more speed. Now i have it. Thank you for your help! If you have an Asus AC68U, can you post your settings?
     
  64. kille72

    kille72 Addicted to LI Member

  65. cyber062

    cyber062 Serious Server Member

    it not just me, a other post:
    http://www.linksysinfo.org/index.php?threads/tomato-shibbys-releases.33858/page-79#post-288700
     
  66. AndreDVJ

    AndreDVJ Addicted to LI Member

    Well it's a matter of someone cherry-pick then resolve conflicts of all tsynik's changes. This is where I step aside, because I'd be spending a good chunk of time blindingly changing stuff that I cannot test at all.
     
    kille72 likes this.
  67. AndreDVJ

    AndreDVJ Addicted to LI Member

    Looking at some Traffic Control how-to, seems that match ip6 is correct.

    http://mirrors.deepspace6.net/Linux+IPv6-HOWTO/x2769.html
     
    tvlz and kille72 like this.
  68. Sean B.

    Sean B. Addicted to LI Member

    Myself and @joksi have managed to get RTSP nat to function properly. It will now automatically strip a destination address if it's not a stun addr and replace it with the masquerade IP as it should. Allowing users who are natted by their ISP or streaming service provider to seamlessly use rtsp protocol without nat address and port forwarding issues. @kille72 I'll get a formal patch together if you're interested.
     
    joksi and Riddlah like this.
  69. kille72

    kille72 Addicted to LI Member

    Good work! I'm absolutely interested :)
     
    joksi likes this.
  70. Sean B.

    Sean B. Addicted to LI Member

    Last edited: Jun 27, 2017
    kille72, AndreDVJ and Elfew like this.
  71. Elfew

    Elfew Network Guru Member

    I understand :(
     
  72. The Master

    The Master Network Guru Member

    Bug or only i use it the wrong way :)

    I want to use MultiWAN Routing with my second Wan. But i could not get it to work.

    Problem:
    I have 2 Wan ISPs. Wan1 (75/7) Wan2 (30/10) Up Down Mbit.

    What i want:

    I try to Use WAN2 to Stream my TVHEADEND Signal to my Phone/Tablet. But it only Uses Wan1 :(

    Here is the Rules Tab. I tried every combination. Anybody could help or is this a bug?!

    Thank you.

    PS: if this is no Bug a Admin could move my Post out of here :)
     

    Attached Files:

  73. kille72

    kille72 Addicted to LI Member

    Last edited: Jun 27, 2017
  74. joksi

    joksi Serious Server Member

    Looks like your doing it right, however, double check that your WAN2 isn't setup as failover (priority 0) otherwise it will not work.
    I'm not using Kille72's releases, but MultiWAN routing works as it's supposed for me on Shibby v.140. I have several rules.
     
  75. joksi

    joksi Serious Server Member

    Actually, the existing modules do work if the client are following RFC's and not setting the "destination=X.X.X.X" parameter in RTSP negotiation (ie. VLC). In my case my STB sets a destination-parameter, and wrongly so the LAN IP (if it used STUN address it would work), and the RTSP helper modules currently in the firmware have some kind of bug not handling a destination-parameter if present correctly. It should replace a LAN-IP with WAN-IP, or strip the parameter completely. This is possible setting as options to the module loading, so it would be great if @kille72 could add a input box or droplist with the actual options available. I will list them below for future reference.

    nf_conntrack_rtsp ports=XX,XX (default is 554, an input field in GUI for adding custom ports would be great)
    nf_nat_rtsp stunaddr=<address> (should not be needed to change in most cases)
    nf_nat_rtsp destaction=[auto|strip|none] (default "auto" seem to work, should not be needed to change in most cases)

    Never the less, @Sean B. have patched the current modules with changes from newer version and now the modules correctly handles different situation and scenarios regarding to the destination-parameter. Great job!
     
    M_ars, Elfew and lancethepants like this.
  76. Sean B.

    Sean B. Addicted to LI Member

    Using a destination address isn't against RFC's. Quote from RFC 7826 Real Time Streaming Protocol v2.0 - Dec 2016

    Your situation, however, happened to have the circumstances come together that exposed the module failing to remove an incorrect ( local ) destination address when that's what the "auto" mode of the module should do. Then exposed even more of an issue when we set the parameter destaction=strip which should strip any destination address it sees.. of which it still failed to do. Regardless of the address being local, stun, or wan.. the module was unable to perform its function. I don't think it's hit a lot of people though, as most STB's and other equipment probably don't set a destination address.. let alone an incorrect one. And generally speaking, when a host does set a local IP as the destination address it's most likely due to a NAT/double NAT issue which is making it think a local address is its internet facing IP.

    I wouldn't be surprised if you powered down and removed the LAN connected to your STB, then watch either the LAN or WAN interfaces with WireShark as you reconnect it that you find it reaching out in some fashion ( generic hits to http url somewhere or dns server etc, something that will have the WAN IP *in* the response back not just as the destination ) to try an find if it's behind NAT.. but when double natted or a false response is received it won't know any better.
     
    Last edited: Jun 28, 2017
    joksi likes this.
  77. Sean B.

    Sean B. Addicted to LI Member

  78. Mercjoe

    Mercjoe Network Guru Member

    Chrome, Edge, FF, Brave, Safari all have the same issue here on multiple machines (windows 7, 10 and Mac OS X)with the QOS graphs. What browser would be more modern?

    Is this something that will be fixed/regressed? Or is this the way it is going to remain as is?
     
  79. kille72

    kille72 Addicted to LI Member

    On 2017.1?
     
  80. kille72

    kille72 Addicted to LI Member

    No problem with compilation ;) Thanks!
     
    Sean B. likes this.
  81. joksi

    joksi Serious Server Member

    Okey, maybe it wasnt against the RFC, but I remember reading somewhere recommendations to not use the destination-parameter cause it could result in someone spoofing the packets and replacing it with a completely different IP. That could potentially risk in DOS in some scenarios/configurations. The VOD-server at my provider does send back an RTSP Forbidden , just don't sure if it's because my destination parameter is a LAN IP or if it's because the fact that the LAN IP differs from the source of the RTSP-packets. (some kind of spoofing protection)

    Actually the STB doesn't seem to make use of STUN, I have had the same device for about two years now and troubleshooted this before (that's how I came up with my alternate solution/hack). There is also no double natting going on, my router has a VLAN-interface with a public IP valid in the IP-TV providers network and it masquerades all outgoing traffic.
     
  82. Sean B.

    Sean B. Addicted to LI Member

    I can't imagine any manufacturer of an STB designed to stream media would configure it to simply take the IP it's received from a local network and blindly hope/assume it's a routable global IP. It must be attempting to determine a global IP somehow, and for whatever reason it's getting a LAN IP in return. If not, then I'd call them and ask what kind of drugs they were smoking when they put it into production. I could only imagine how many people have it fail to connect for them, as only a small percentage have the ability/knowledge to troubleshoot to this extent or have a router with rtsp natting ability.
     
  83. The Master

    The Master Network Guru Member

    Ok Thank you.

    Could somebody give me a Sample how it should look like? Or mabye test it with kille72 Build? (2017.1 and a new Beta from Kille72)
     
  84. joksi

    joksi Serious Server Member

    I agree, however, if there is way that the STB connects to a STUN server why does it fails? It doesnt sound reasonable to me.

    Actually, the way its suppose to work with this provider is that you use their provided router (im not using it cause I prefer Tomato, but their gateway probably have a modified working RTSP ALG for port 5055).
    The gateway is offered to the ISPs custom who subscribe to all their Services, however in my case I have only the IP-TV service from them and Internet from another provider. This means that I have a fiber coming in with Internet on vlan 0 uttagged and IP-TV on another VLAN which is taggad. I have reproduced the setup from their box in Tomato, however the provider doesnt support this and recommends connecting the STB behind a switch so it doesnt get natted by a random SOHO-router.

    That would probably be the explanation. I have a routed setup with IGMP-proxy and now finally a working RTSP conntrack modules :)
     
    Sean B. likes this.
  85. Sean B.

    Sean B. Addicted to LI Member

    Ahhhh, now it makes sense as to why they configured the STB the way it is. Missing piece of puzzle.
     
    joksi likes this.
  86. pedro311

    pedro311 Connected Client Member

    tvlz, Elfew, The Master and 1 other person like this.
  87. The Master

    The Master Network Guru Member

    So mutch change in such a short time.....
    A VERY BIG THANK YOU to all the devs out there :)
     
    M_ars, gffmac and kille72 like this.
  88. Mercjoe

    Mercjoe Network Guru Member

    on the released Beta
     
  89. iv7777

    iv7777 Connected Client Member

    I have compiled an AIO with latest commits and loaded to my EA6400. So far found a couple issues. First in QoS graphics shows "Your browser does not support SVG" instead of QoS image in IE11, Edge, maybe more browsers. It works in Chrome though. The second is the Advanced/Wireless Settings "Country / Region" shows "a#". See the attached pictures. However, for tsynik's AIO and VPN builds, the QoS works in all browsers and the "Country / Region" is normal too. Will keep testing.
    qos.jpg wireless.jpg qos.jpg wireless.jpg
     
  90. M_ars

    M_ars Network Guru Member

    Hi iv7777,
    the "#a" is for Tenda AC15 support but you should be able to select a different country?
    --> special case for #a - used as default in Tenda AC15
     
  91. Darkbing

    Darkbing Network Newbie Member

    Hi @kille72 , I'm glad that all these beta's and changes are coming up so quickly lately great work! :) May I ask if the multiwan feature also now works with QoS has it been fixed? Are the graphs still bugged when using 2 wans?
     
  92. kille72

    kille72 Addicted to LI Member

    Want to test the latest beta? Which router do you have?
     
  93. kille72

    kille72 Addicted to LI Member

    I see...thanks.
    2017-06-29_16h21_41.png

    SVG will be corrected in older browsers, I hope...
     
    The Master and Mercjoe like this.
  94. Mercjoe

    Mercjoe Network Guru Member

    Kille72,

    If I may put this out there...

    If you have beta's to test I recommend throw them out there. We will provide feedback that can help you debug faster. Look how fast you got feedback from the last one you let out and how rapidly things got resolved.
     
    Darkbing, M_ars, szpunk and 2 others like this.
  95. Darkbing

    Darkbing Network Newbie Member

    Sure. I have RT-N18U
     
  96. kille72

    kille72 Addicted to LI Member

    Internet Explorer with 2017.2b51:

    IE.PNG

    Thanks @pedro311!
     
  97. kille72

    kille72 Addicted to LI Member

    Problem with AdBlock and OpenVPN after reboot, why does it start 2 times? I have no more ideas. @pedro311 has no problem with LTE connection, I use DHCP...

    Code:
    Jul  1 12:21:47 Asus user.info adblock: activated - 2432 entries
    Jul  1 12:22:03 Asus user.info adblock: activated - 0 entries
    
    Jul  1 12:21:31 Asus daemon.notice openvpn[1936]: OpenVPN 2.4.3 arm-unknown-linux-gnu [SSL (OpenSSL)] [LZO] [LZ4] [EPOLL] [MH/PKTINFO] [AEAD] built on Jun 30 2017
    Jul  1 12:21:39 Asus daemon.notice openvpn[2455]: OpenVPN 2.4.3 arm-unknown-linux-gnu [SSL (OpenSSL)] [LZO] [LZ4] [EPOLL] [MH/PKTINFO] [AEAD] built on Jun 30 2017
    wan.PNG

    Code:
    Jan  1 01:00:26 Asus user.info hotplug[904]: USB ext4 fs at /dev/sda2 mounted on /nas
    Jan  1 01:00:26 Asus kern.info kernel: EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
    Jan  1 01:00:56 Asus kern.warn kernel: gro disabled
    Jan  1 01:00:57 Asus user.notice root: Terminating transmission-daemon...
    Jan  1 01:00:57 Asus user.info preinit[1]: MultiWAN: MWAN is 1 (max 4).
    Jan  1 01:00:57 Asus user.notice root: Stopping NFS Server ...
    Jan  1 01:00:57 Asus user.notice root: Transmission daemon successfully stopped.
    Jan  1 01:00:58 Asus user.notice root: NFS Server stopped ...
    Jan  1 01:00:58 Asus kern.info kernel: Ebtables v2.0 registered
    Jan  1 01:00:58 Asus kern.info kernel: device eth1 left promiscuous mode
    Jan  1 01:00:58 Asus kern.info kernel: br0: port 2(eth1) entering forwarding state
    Jan  1 01:00:58 Asus kern.info kernel: device eth2 left promiscuous mode
    Jan  1 01:00:58 Asus kern.info kernel: br0: port 3(eth2) entering forwarding state
    Jan  1 01:00:58 Asus kern.info kernel: device eth1 entered promiscuous mode
    Jan  1 01:00:58 Asus kern.info kernel: br0: port 2(eth1) entering forwarding state
    Jan  1 01:00:58 Asus kern.info kernel: br0: port 2(eth1) entering forwarding state
    Jan  1 01:00:58 Asus kern.info kernel: device eth2 entered promiscuous mode
    Jan  1 01:00:58 Asus kern.info kernel: br0: port 3(eth2) entering forwarding state
    Jan  1 01:00:58 Asus kern.info kernel: br0: port 3(eth2) entering forwarding state
    Jan  1 01:00:59 Asus kern.info kernel: ipt_account 0.1.21 : Piotr Gasidlo <quaker@barbara.eu.org>, http://code.google.com/p/ipt-account/
    Jan  1 01:00:59 Asus daemon.warn dnsmasq[890]: failed to access /etc/resolv.dnsmasq: No such file or directory
    Jan  1 01:00:59 Asus user.debug dhcpc-event[1413]: 255: pptp peerdns disabled
    Jan  1 01:00:59 Asus daemon.info dnsmasq[890]: reading /etc/resolv.dnsmasq
    Jan  1 01:00:59 Asus daemon.info dnsmasq[890]: using nameserver 37.247.0.xx#53
    Jan  1 01:00:59 Asus daemon.info dnsmasq[890]: using nameserver 37.247.0.xx#53
    Jan  1 01:01:00 Asus user.info preinit[1]: Asus RT-AC56U: Tomato 1.28.0000 -2017.2b51-kille72- K26ARM USB AIO-64K
    Jan  1 01:01:00 Asus user.debug preinit[1]: 255: pptp peerdns disabled
    Jan  1 01:01:00 Asus daemon.info dnsmasq[890]: reading /etc/resolv.dnsmasq
    Jan  1 01:01:00 Asus daemon.info dnsmasq[890]: using nameserver 37.247.0.xx#53
    Jan  1 01:01:00 Asus daemon.info dnsmasq[890]: using nameserver 37.247.0.xx#53
    Jan  1 01:01:00 Asus daemon.info dnsmasq[890]: exiting on receipt of SIGTERM
    Jan  1 01:01:00 Asus daemon.info dnsmasq[1444]: started, version 2.77 cachesize 4096
    Jan  1 01:01:00 Asus daemon.info dnsmasq[1444]: compile time options: IPv6 GNU-getopt no-RTC no-DBus no-i18n no-IDN DHCP DHCPv6 no-Lua TFTP no-conntrack ipset Tomato-helper auth DNSSEC loop-detect inotify
    Jan  1 01:01:00 Asus daemon.warn dnsmasq[1444]: warning: interface tap21 does not currently exist
    Jan  1 01:01:00 Asus daemon.info dnsmasq[1444]: asynchronous logging enabled, queue limit is 5 messages
    Jan  1 01:01:00 Asus daemon.info dnsmasq-dhcp[1444]: DHCP, IP range 192.168.1.100 -- 192.168.1.149, lease time 1d
    Jan  1 01:01:00 Asus daemon.info dnsmasq[1444]: reading /etc/resolv.dnsmasq
    Jan  1 01:01:00 Asus daemon.info dnsmasq[1444]: using nameserver 37.247.0.xx#53
    Jan  1 01:01:00 Asus daemon.info dnsmasq[1444]: using nameserver 37.247.0.xx#53
    Jan  1 01:01:00 Asus daemon.info dnsmasq[1444]: read /etc/hosts - 2 addresses
    Jan  1 01:01:00 Asus daemon.info dnsmasq[1444]: read /etc/dnsmasq/hosts/hosts - 17 addresses
    Jan  1 01:01:00 Asus daemon.info dnsmasq-dhcp[1444]: read /etc/dnsmasq/dhcp/dhcp-hosts
    Jan  1 01:01:01 Asus kern.warn kernel: xt_connbytes: Forcing CT accounting to be enabled
    Jul  1 12:21:27 Asus daemon.err nmbd[1174]: *****
    Jul  1 12:21:27 Asus daemon.err nmbd[1174]:
    Jul  1 12:21:27 Asus daemon.err nmbd[1174]: Samba server ASUS is now a domain master browser for workgroup WORKGROUP on subnet UNICAST_SUBNET
    Jul  1 12:21:27 Asus daemon.err nmbd[1174]:
    Jul  1 12:21:27 Asus daemon.err nmbd[1174]: *****
    Jul  1 12:21:27 Asus daemon.err nmbd[1174]: become_domain_master_browser_bcast:
    Jul  1 12:21:27 Asus daemon.err nmbd[1174]: Attempting to become domain master browser on workgroup WORKGROUP on subnet 192.168.1.1
    Jul  1 12:21:27 Asus daemon.err nmbd[1174]: become_domain_master_browser_bcast: querying subnet 192.168.1.1 for domain master browser on workgroup WORKGROUP
    Jul  1 12:21:30 Asus kern.info kernel: tun: Universal TUN/TAP device driver, 1.6
    Jul  1 12:21:30 Asus kern.info kernel: tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
    Jul  1 12:21:31 Asus kern.info kernel: device tap21 entered promiscuous mode
    Jul  1 12:21:31 Asus kern.info kernel: ADDRCONF(NETDEV_UP): tap21: link is not ready
    Jul  1 12:21:31 Asus daemon.notice openvpn[1936]: OpenVPN 2.4.3 arm-unknown-linux-gnu [SSL (OpenSSL)] [LZO] [LZ4] [EPOLL] [MH/PKTINFO] [AEAD] built on Jun 30 2017
    Jul  1 12:21:31 Asus daemon.notice openvpn[1936]: library versions: OpenSSL 1.0.2l  25 May 2017, LZO 2.10
    Jul  1 12:21:31 Asus daemon.warn openvpn[1940]: NOTE: when bridging your LAN adapter with the TAP adapter, note that the new bridge adapter will often take on its own IP address that is different from what the LAN adapter was previously set to
    Jul  1 12:21:31 Asus daemon.notice openvpn[1940]: Diffie-Hellman initialized with 2048 bit key
    Jul  1 12:21:32 Asus daemon.notice openvpn[1940]: TUN/TAP device tap21 opened
    Jul  1 12:21:32 Asus daemon.notice openvpn[1940]: TUN/TAP TX queue length set to 100
    Jul  1 12:21:32 Asus daemon.warn openvpn[1940]: Could not determine IPv4/IPv6 protocol. Using AF_INET6
    Jul  1 12:21:32 Asus daemon.notice openvpn[1940]: Socket Buffers: R=[87380->87380] S=[16384->16384]
    Jul  1 12:21:32 Asus daemon.notice openvpn[1940]: setsockopt(IPV6_V6ONLY=0)
    Jul  1 12:21:32 Asus daemon.notice openvpn[1940]: Listening for incoming TCP connection on [AF_INET6][undef]:1194
    Jul  1 12:21:32 Asus daemon.notice openvpn[1940]: TCPv6_SERVER link local (bound): [AF_INET6][undef]:1194
    Jul  1 12:21:32 Asus daemon.notice openvpn[1940]: TCPv6_SERVER link remote: [AF_UNSPEC]
    Jul  1 12:21:32 Asus daemon.notice openvpn[1940]: MULTI: multi_init called, r=256 v=256
    Jul  1 12:21:32 Asus daemon.notice openvpn[1940]: MULTI: TCP INIT maxclients=1024 maxevents=1028
    Jul  1 12:21:32 Asus daemon.notice openvpn[1940]: Initialization Sequence Completed
    Jul  1 12:21:32 Asus kern.info kernel: ADDRCONF(NETDEV_CHANGE): tap21: link becomes ready
    Jul  1 12:21:32 Asus kern.info kernel: br0: port 4(tap21) entering forwarding state
    Jul  1 12:21:32 Asus kern.info kernel: br0: port 4(tap21) entering forwarding state
    Jul  1 12:21:32 Asus user.info adblock: prepare to download ...
    Jul  1 12:21:32 Asus user.info adblock: [1] downloading blacklist - http://winhelp2002.mvps.org/hosts.txt
    Jul  1 12:21:32 Asus user.debug dhcpc-event[1977]: 255: pptp peerdns disabled
    Jul  1 12:21:32 Asus daemon.info dnsmasq[1444]: reading /etc/resolv.dnsmasq
    Jul  1 12:21:32 Asus user.debug preinit[1]: 255: pptp peerdns disabled
    Jul  1 12:21:32 Asus daemon.info dnsmasq[1444]: using nameserver 37.247.0.XX#53
    Jul  1 12:21:32 Asus daemon.info dnsmasq[1444]: using nameserver 37.247.0.XX#53
    Jul  1 12:21:32 Asus daemon.info dnsmasq[1444]: reading /etc/resolv.dnsmasq
    Jul  1 12:21:32 Asus daemon.info dnsmasq[1444]: using nameserver 37.247.0.XX#53
    Jul  1 12:21:32 Asus daemon.info dnsmasq[1444]: using nameserver 37.247.0.XX#53
    Jul  1 12:21:32 Asus daemon.info dnsmasq[1444]: exiting on receipt of SIGTERM
    Jul  1 12:21:32 Asus daemon.info dnsmasq[1980]: started, version 2.77 cachesize 4096
    Jul  1 12:21:32 Asus daemon.info dnsmasq[1980]: compile time options: IPv6 GNU-getopt no-RTC no-DBus no-i18n no-IDN DHCP DHCPv6 no-Lua TFTP no-conntrack ipset Tomato-helper auth DNSSEC loop-detect inotify
    Jul  1 12:21:32 Asus daemon.warn dnsmasq[1980]: warning: interface tap21 does not currently exist
    Jul  1 12:21:32 Asus daemon.info dnsmasq[1980]: asynchronous logging enabled, queue limit is 5 messages
    Jul  1 12:21:32 Asus daemon.info dnsmasq-dhcp[1980]: DHCP, IP range 192.168.1.100 -- 192.168.1.149, lease time 1d
    Jul  1 12:21:32 Asus daemon.info dnsmasq[1980]: reading /etc/resolv.dnsmasq
    Jul  1 12:21:32 Asus daemon.info dnsmasq[1980]: using nameserver 37.247.0.XX#53
    Jul  1 12:21:32 Asus daemon.info dnsmasq[1980]: using nameserver 37.247.0.XX#53
    Jul  1 12:21:32 Asus daemon.info dnsmasq[1980]: read /etc/hosts - 2 addresses
    Jul  1 12:21:32 Asus daemon.info dnsmasq[1980]: read /etc/dnsmasq/hosts/hosts - 17 addresses
    Jul  1 12:21:32 Asus daemon.info dnsmasq-dhcp[1980]: read /etc/dnsmasq/dhcp/dhcp-hosts
    Jul  1 12:21:33 Asus daemon.info dnsmasq-dhcp[1980]: DHCPREQUEST(br0) 192.168.1.107 XX:77:33:c1:15:XX
    Jul  1 12:21:33 Asus daemon.info dnsmasq-dhcp[1980]: DHCPACK(br0) 192.168.1.107 XX:77:33:c1:15:XX Chromecast
    Jul  1 12:21:35 Asus daemon.err nmbd[1174]: *****
    Jul  1 12:21:35 Asus daemon.err nmbd[1174]:
    Jul  1 12:21:35 Asus daemon.err nmbd[1174]: Samba server ASUS is now a domain master browser for workgroup WORKGROUP on subnet 192.168.1.1
    Jul  1 12:21:35 Asus daemon.err nmbd[1174]:
    Jul  1 12:21:35 Asus daemon.err nmbd[1174]: *****
    Jul  1 12:21:38 Asus daemon.notice openvpn[1940]: Closing TUN/TAP interface
    Jul  1 12:21:38 Asus daemon.notice openvpn[1940]: SIGTERM[hard,] received, process exiting
    Jul  1 12:21:38 Asus kern.info kernel: br0: port 4(tap21) entering forwarding state
    Jul  1 12:21:38 Asus kern.info kernel: br0: port 4(tap21) entering forwarding state
    Jul  1 12:21:38 Asus kern.info kernel: br0: port 4(tap21) entering forwarding state
    Jul  1 12:21:39 Asus kern.info kernel: br0: port 4(tap21) entering forwarding state
    Jul  1 12:21:39 Asus kern.info kernel: br0: port 4(tap21) entering disabled state
    Jul  1 12:21:39 Asus kern.info kernel: tun: Universal TUN/TAP device driver, 1.6
    Jul  1 12:21:39 Asus kern.info kernel: tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
    Jul  1 12:21:39 Asus kern.info kernel: device tap21 entered promiscuous mode
    Jul  1 12:21:39 Asus kern.info kernel: ADDRCONF(NETDEV_UP): tap21: link is not ready
    Jul  1 12:21:39 Asus daemon.notice openvpn[2455]: OpenVPN 2.4.3 arm-unknown-linux-gnu [SSL (OpenSSL)] [LZO] [LZ4] [EPOLL] [MH/PKTINFO] [AEAD] built on Jun 30 2017
    Jul  1 12:21:39 Asus daemon.notice openvpn[2455]: library versions: OpenSSL 1.0.2l  25 May 2017, LZO 2.10
    Jul  1 12:21:39 Asus daemon.warn openvpn[2459]: NOTE: when bridging your LAN adapter with the TAP adapter, note that the new bridge adapter will often take on its own IP address that is different from what the LAN adapter was previously set to
    Jul  1 12:21:39 Asus daemon.notice openvpn[2459]: Diffie-Hellman initialized with 2048 bit key
    Jul  1 12:21:39 Asus daemon.notice openvpn[2459]: TUN/TAP device tap21 opened
    Jul  1 12:21:39 Asus daemon.notice openvpn[2459]: TUN/TAP TX queue length set to 100
    Jul  1 12:21:39 Asus daemon.warn openvpn[2459]: Could not determine IPv4/IPv6 protocol. Using AF_INET6
    Jul  1 12:21:39 Asus daemon.notice openvpn[2459]: Socket Buffers: R=[87380->87380] S=[16384->16384]
    Jul  1 12:21:39 Asus daemon.notice openvpn[2459]: setsockopt(IPV6_V6ONLY=0)
    Jul  1 12:21:39 Asus daemon.notice openvpn[2459]: Listening for incoming TCP connection on [AF_INET6][undef]:1194
    Jul  1 12:21:39 Asus daemon.notice openvpn[2459]: TCPv6_SERVER link local (bound): [AF_INET6][undef]:1194
    Jul  1 12:21:39 Asus daemon.notice openvpn[2459]: TCPv6_SERVER link remote: [AF_UNSPEC]
    Jul  1 12:21:39 Asus daemon.notice openvpn[2459]: MULTI: multi_init called, r=256 v=256
    Jul  1 12:21:39 Asus daemon.notice openvpn[2459]: MULTI: TCP INIT maxclients=1024 maxevents=1028
    Jul  1 12:21:39 Asus daemon.notice openvpn[2459]: Initialization Sequence Completed
    Jul  1 12:21:39 Asus kern.info kernel: ADDRCONF(NETDEV_CHANGE): tap21: link becomes ready
    Jul  1 12:21:39 Asus kern.info kernel: br0: port 4(tap21) entering forwarding state
    Jul  1 12:21:39 Asus kern.info kernel: br0: port 4(tap21) entering forwarding state
    Jul  1 12:21:39 Asus user.info adblock: prepare to download ...
    Jul  1 12:21:39 Asus user.info adblock: [1] downloading blacklist - http://winhelp2002.mvps.org/hosts.txt
    Jul  1 12:21:39 Asus user.info adblock: ... [1] found 14902 entries
    Jul  1 12:21:39 Asus user.info adblock: [2] downloading blacklist - http://adaway.org/hosts.txt
    Jul  1 12:21:40 Asus user.info adblock: ... [2] found 525 entries
    Jul  1 12:21:40 Asus user.info adblock: [3] downloading blacklist - http://hosts-file.net/ad_servers.txt
    Jul  1 12:21:41 Asus user.info adblock: ... [1] found 14902 entries
    Jul  1 12:21:41 Asus user.info adblock: [2] downloading blacklist - http://adaway.org/hosts.txt
    Jul  1 12:21:41 Asus user.info adblock: ... [2] found 525 entries
    Jul  1 12:21:41 Asus user.info adblock: [3] downloading blacklist - http://hosts-file.net/ad_servers.txt
    Jul  1 12:21:43 Asus user.info adblock: ... [3] found 37648 entries
    Jul  1 12:21:43 Asus daemon.err nmbd[1174]: *****
    Jul  1 12:21:43 Asus daemon.err nmbd[1174]:
    Jul  1 12:21:43 Asus daemon.err nmbd[1174]: Samba name server ASUS is now a local master browser for workgroup WORKGROUP on subnet 192.168.1.1
    Jul  1 12:21:43 Asus daemon.err nmbd[1174]:
    Jul  1 12:21:43 Asus daemon.err nmbd[1174]: *****
    Jul  1 12:21:43 Asus user.info adblock: [4] downloading blacklist - http://www.malwaredomainlist.com/hostslist/hosts.txt
    Jul  1 12:21:43 Asus user.info adblock: ... [4] found 1158 entries
    Jul  1 12:21:43 Asus user.info adblock: [5] downloading blacklist - http://pgl.yoyo.org/adservers/serverlist.php?hostformat=hosts&mimetype=plaintext
    Jul  1 12:21:44 Asus user.info adblock: ... [5] found 2341 entries
    Jul  1 12:21:44 Asus user.info adblock: skip disabled blacklist - http://someonewhocares.org/hosts/zero/hosts
    Jul  1 12:21:44 Asus user.info adblock: [6] downloading blacklist - https://raw.githubusercontent.com/WindowsLies/BlockWindows/master/hosts
    Jul  1 12:21:44 Asus user.info adblock: ... [3] found 48026 entries
    Jul  1 12:21:44 Asus user.info adblock: [4] downloading blacklist - http://www.malwaredomainlist.com/hostslist/hosts.txt
    Jul  1 12:21:44 Asus user.info adblock: ... [6] found 109 entries
    Jul  1 12:21:44 Asus user.info adblock: skip disabled blacklist - http://sysctl.org/cameleon/hosts
    Jul  1 12:21:44 Asus user.info adblock: skip disabled blacklist - http://adblock.gjtech.net/?format=hostfile
    Jul  1 12:21:44 Asus user.info adblock: skip disabled blacklist - http://hostsfile.mine.nu/Hosts
    Jul  1 12:21:44 Asus user.info adblock: skip disabled blacklist - https://raw.github.com/notracking/hosts-blocklists/master/hostnames.txt
    Jul  1 12:21:44 Asus user.info adblock: add custom hosts to blacklist
    Jul  1 12:21:44 Asus user.info adblock: ... [4] download error! Please check URL
    Jul  1 12:21:44 Asus user.info adblock: [5] downloading blacklist - http://pgl.yoyo.org/adservers/serverlist.php?hostformat=hosts&mimetype=plaintext
    Jul  1 12:21:45 Asus user.info adblock: ... [5] found 2341 entries
    Jul  1 12:21:45 Asus user.info adblock: skip disabled blacklist - http://someonewhocares.org/hosts/zero/hosts
    Jul  1 12:21:45 Asus user.info adblock: [6] downloading blacklist - https://raw.githubusercontent.com/WindowsLies/BlockWindows/master/hosts
    Jul  1 12:21:45 Asus user.info adblock: ... [6] found 109 entries
    Jul  1 12:21:45 Asus user.info adblock: skip disabled blacklist - http://sysctl.org/cameleon/hosts
    Jul  1 12:21:45 Asus user.info adblock: skip disabled blacklist - http://adblock.gjtech.net/?format=hostfile
    Jul  1 12:21:45 Asus user.info adblock: skip disabled blacklist - http://hostsfile.mine.nu/Hosts
    Jul  1 12:21:45 Asus user.info adblock: skip disabled blacklist - https://raw.github.com/notracking/hosts-blocklists/master/hostnames.txt
    Jul  1 12:21:45 Asus user.info adblock: add custom hosts to blacklist
    Jul  1 12:21:47 Asus daemon.info dnsmasq-dhcp[1980]: DHCPREQUEST(br0) 192.168.1.105 XX:39:f7:76:28:XX
    Jul  1 12:21:47 Asus daemon.info dnsmasq-dhcp[1980]: DHCPACK(br0) 192.168.1.105 XX:39:f7:76:28:XX G3
    Jul  1 12:21:47 Asus user.info adblock: activated - 2432 entries
    Jul  1 12:21:48 Asus user.info adblock: add cron job
    Jul  1 12:21:48 Asus daemon.info dnsmasq[1980]: exiting on receipt of SIGTERM
    Jul  1 12:21:48 Asus user.debug preinit[1]: 255: pptp peerdns disabled
    Jul  1 12:21:48 Asus daemon.info dnsmasq[2830]: started, version 2.77 cachesize 4096
    Jul  1 12:21:48 Asus daemon.info dnsmasq[2830]: compile time options: IPv6 GNU-getopt no-RTC no-DBus no-i18n no-IDN DHCP DHCPv6 no-Lua TFTP no-conntrack ipset Tomato-helper auth DNSSEC loop-detect inotify
    Jul  1 12:21:48 Asus daemon.warn dnsmasq[2830]: warning: interface tap21 does not currently exist
    Jul  1 12:21:48 Asus daemon.info dnsmasq[2830]: asynchronous logging enabled, queue limit is 5 messages
    Jul  1 12:21:48 Asus daemon.info dnsmasq-dhcp[2830]: DHCP, IP range 192.168.1.100 -- 192.168.1.149, lease time 1d
    Jul  1 12:21:48 Asus daemon.info dnsmasq[2830]: reading /etc/resolv.dnsmasq
    Jul  1 12:21:48 Asus daemon.info dnsmasq[2830]: using nameserver 37.247.0.XX#53
    Jul  1 12:21:48 Asus daemon.info dnsmasq[2830]: using nameserver 37.247.0.XX#53
    Jul  1 12:21:48 Asus daemon.info dnsmasq[2830]: read /etc/hosts - 2 addresses
    Jul  1 12:21:48 Asus daemon.info dnsmasq[2830]: read /etc/dnsmasq/hosts/hosts - 17 addresses
    Jul  1 12:21:48 Asus daemon.info dnsmasq-dhcp[2830]: read /etc/dnsmasq/dhcp/dhcp-hosts
    Jul  1 12:22:03 Asus user.info adblock: activated - 0 entries
    Jul  1 12:22:03 Asus daemon.info dnsmasq[2830]: exiting on receipt of SIGTERM
    Jul  1 12:22:03 Asus user.debug preinit[1]: 255: pptp peerdns disabled
    Jul  1 12:22:03 Asus daemon.info dnsmasq[2867]: started, version 2.77 cachesize 4096
    Jul  1 12:22:03 Asus daemon.info dnsmasq[2867]: compile time options: IPv6 GNU-getopt no-RTC no-DBus no-i18n no-IDN DHCP DHCPv6 no-Lua TFTP no-conntrack ipset Tomato-helper auth DNSSEC loop-detect inotify
    Jul  1 12:22:03 Asus daemon.warn dnsmasq[2867]: warning: interface tap21 does not currently exist
    Jul  1 12:22:03 Asus daemon.info dnsmasq[2867]: asynchronous logging enabled, queue limit is 5 messages
    Jul  1 12:22:03 Asus daemon.info dnsmasq-dhcp[2867]: DHCP, IP range 192.168.1.100 -- 192.168.1.149, lease time 1d
    Jul  1 12:22:03 Asus daemon.info dnsmasq[2867]: reading /etc/resolv.dnsmasq
    Jul  1 12:22:03 Asus daemon.info dnsmasq[2867]: using nameserver 37.247.0.XX#53
    Jul  1 12:22:03 Asus daemon.info dnsmasq[2867]: using nameserver 37.247.0.XX#53
    Jul  1 12:22:03 Asus daemon.info dnsmasq[2867]: read /etc/hosts - 2 addresses
    Jul  1 12:22:03 Asus daemon.info dnsmasq[2867]: read /etc/dnsmasq/hosts/hosts - 17 addresses
    Jul  1 12:22:03 Asus daemon.info dnsmasq-dhcp[2867]: read /etc/dnsmasq/dhcp/dhcp-hosts
    Jul  1 12:22:18 Asus daemon.info dnsmasq-dhcp[2867]: DHCPREQUEST(br0) 192.168.1.101 XX:a0:50:70:2f:XX
    Jul  1 12:22:18 Asus daemon.info dnsmasq-dhcp[2867]: DHCPACK(br0) 192.168.1.101 XX:a0:50:70:2f:XX dell
    Jul  1 12:22:24 Asus cron.err crond[899]: time disparity of 24981741 minutes detected
     
    Last edited: Jul 3, 2017
  98. Darkbing

    Darkbing Network Newbie Member

    Could you send me the beta link thru pm @kille72 ? Thanks
     
  99. kille72

    kille72 Addicted to LI Member

    You'll have to wait, we have some problems that need to be resolved first...
     
  100. Darkbing

    Darkbing Network Newbie Member

    Oh okay I'm sorry. ;) I didn't know. Goodluck! Just let me know if everything's working and you'll need to have someone to test.
     
    kille72 likes this.

Share This Page