1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Forwarding Question

Discussion in 'Cisco/Linksys Wireless Routers' started by Stainless_Steelrat, Sep 17, 2007.

  1. Stainless_Steelrat

    Stainless_Steelrat Network Guru Member

    OK, I have a WTR54g -- and I have it configured to port forward via the DMZ option to the external IP for my ISA Server. This setup has been working great for multiple years, and runs like a champ.... I'm running with the hyperwrt at the moment.....

    I've recently tried to add some additional software for SSL VPN, however, in order for it to work properly with ISA, I have to run it on a second vIP (virtual IP) on the ISA Server. This IP is in the same subnet as the internal side for the linksys.

    I'm trying to figure out if I can use an IPtable command to forward an incoming request to the linksys via a specific host name to the vIP on the ISA.... I've found that I can forward a second external IP, but I don't have one. Is it possible to forward stuff for a specific destination (URL)?

    Thanks for the insight......

Share This Page